Electrochemical Treatment of Textile Effluent Containing Acid Red 131 Dye
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 18, Issue 1
Abstract
Electrochemical treatment of synthetic solution containing Acid Red 131 dye was studied by performing experiments in a batch mode of operation using aluminum electrode. The effect of various parameters, such as the pH of the solution, current density, interelectrode distance, agitation speed, solution conductivity, electrolysis time, retention time, and initial concentration of the dye in the solution, was investigated. The results were analyzed in terms of color removal efficiency (CRE) and the optimum values of the parameters were determined. The maximum CRE (98%) for a synthetic dye solution was obtained at the optimum conditions of current density of and a pH solution of 11 for an electrolysis time of 120 min. Electrochemical treatment of industrial effluent containing Reactive Black B, Orange 3R, and Yellow GR dyes was carried out at the optimum values of the parameters and a CRE of 93.5, 92, and 91.1% was obtained for the three dyes, respectively. Experiments were performed using aluminum sulphate as the coagulant to compare the color removal efficiencies obtained by electrocoagulation and chemical coagulation.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmed, M. N., and Ram, R. N. (1992). “Removal of basic dye from wastewater using silica as adsorbent.” Environ. Pollut., 77(1), 79–86.
Akbal, F., and Camci, S. (2011). “Copper, chromium and nickel removal from metal plating wastewater by electrocoagulation.” Desalination, 269(1–3), 214–222.
American Public Health Association (APHA). (1998). “Standard methods for the examination of water and waste water.” 20th Ed., American Public Health Association, Washington, DC.
Aoudj, S., Khelifa, A., Drouiche, N., Hecini, M., and Hamitouche, H. (2010). “Electrocoagulation process applied to wastewater containing dyes from textile industry.” Chem. Eng. Process., 49(11), 1176–1182.
Bayramoglu, M., Kobya, M., Can, O. T., and Sozbir, M. (2004). “Operating cost analysis of electrocoagulation of textile dye wastewater.” Sep. Purif. Technol., 37(2), 117–125.
Can, O. T., Bayramoglu, M., and Kobya, M. (2003). “Decolorization of reactive dye solutions by electrocoagulation using aluminum electrodes.” Ind. Eng. Chem. Res., 42(14), 3391–3396.
Can, O. T., Kobya, M., Demirbas, E., and Bayramoglu, M. (2006). “Treatment of the textile wastewater by combined electrocoagulation.” Chemosphere, 62(2), 181–187.
Cestari, A. R., Vieira, E. F. S., Dos Santos, A. G. P., Mota, J. A., and De Almeida, V. P. (2004). “Adsorption of anionic dyes on chitosan beads: 1. The influence of the chemical structures of dyes and temperature on the adsorption kinetics.” J. Colloid Interf. Sci., 280(2), 380–386.
Cicek, F., Ozer, D., Ozer, A., and Ozer, A. (2007). “Low cost removal of reactive dyes using wheat bran.” J. Hazard. Mater., 146(1–2), 408–416.
Daneshvar, N., Ashassi-Sorkhabi, H., and Tizpar, A. (2003). “Decolorization of orange II by electrocoagulation method.” Sep. Purif. Technol., 31(2), 153–162.
Daneshvar, N., Khataee, A. R., Ghadim, A. R. A., and Rasoulifard, M. H. (2007). “Decolorization of C.I. Acid Yellow 23 solution by electrocoagulation process: Investigation of operational parameters and evaluation of specific electrical energy consumption (SEEC).” J. Hazard. Mater., 148(3), 566–572.
El-Ashtoukhy, E-S. Z., and Amin, N. K. (2010). “Removal of acid green dye 50 from wastewater by anodic oxidation and electrocoagulation—A comparative study.” J. Hazard. Mater., 179(1–3), 113–119.
Fu, Y., and Viraraghavan, T. (2001). “Fungal decolorization of dye wastewaters: A review.” Bioresource Technol., 79(3), 251–262.
Golder, A. K., Hridaya, N., Samanta, A. N., and Ray, S. (2005). “Electrocoagulation of methylene blue and eosin yellowish using mild steel electrodes.” J. Hazard. Mater., 127(1–3), 134–140.
Hao, O. J., Kim, H., and Chiang, P. C. (2000). “Decolorization of wastewater: Critical reviews.” Environ. Sci. Technol., 30(4), 449–505.
Hessel, C., Allegre, C., Maisseu, M., Charbit, F., and Moulin, P. (2007). “Guidelines and legislation for dye house effluents.” J. Environ. Manage., 83(2),171–180.
Huang, Y. H., Tsai, S. T., Huang, Y. F., and Chen, C. Y. (2007). “Degradation of commercial azo dye Reactive Black B in photo/ferrioxalate system.” J. Hazard. Mater., 140(1–2), 382–388.
Khandegar, V., and Saroha, A. K. (2012). “Electrochemical treatment of distillery spent wash using aluminum and iron electrodes.” Chinese J. Chem. Eng., 20(3), 439–443.
Krishna, B. M., Murthy, U. N., Kumar, B. M., and Lokesh, K. S. (2010). “Electrochemical pretreatment of distillery wastewater using aluminum electrode.” J. Appl. Electrochem., 40(3), 663–667.
Merzouk, B., et al. (2011). “Effect of modification of textile wastewater composition on electrocoagulation efficiency.” Desalination, 275(1–3), 181–186.
Modirshahla, N., Behnajady, M. A., and Mohammadi-Aghdam, S. (2008). “Investigation of the effect of different electrodes and their connections on the removal efficiency of 4-nitrophenol from aqueous solution by electrocoagulation.” J. Hazard. Mater., 154(1–3), 778–786.
Pearce, C. I., Lloyd, J. R., and Guthrie, J. T. (2003). “The removal of colour from textile wastewater using whole bacterial cells: a review.” Dyes Pigments, 58(3), 179–196.
Phalakornkule, C., Polgumhang, S., Tongdaung, W., Karakat, B., and Nuyut, T. (2010). “Electrocoagulation of blue reactive, red disperse and mixed dyes, and application in treating textile effluent.” J. Environ. Manage., 91(4), 918–926.
Robinson, T., McMullan, G., Marchant, R., and Nigam, P. (2001). “Remediation of dyes in textile effluent: A critical review on current treatment technologies with a proposed alternative.” Bioresource Technol., 77(3), 247–255.
Schievano, E., Menegazzo, I., Marotta, E., and Mammi, S. (2011). “Structure elucidation of the dye Acid Red 131: Complete 1H, 13C and 15N NMR data assignment.” Magn. Reson. Chem., 49(8), 523–528.
Song, S., Yao, J., He, Z., Qiu, J., Chen, J. (2008). “Effect of operational parameters on the decolorization of C.I. Reactive Blue 19 in aqueous solution by ozone enhanced electrocoagulation.” J. Hazard. Mater., 152(1), 204–210.
Tamboli, D. P., Gomare, S. S., Kalme, S. S., Jadhav, U. U., and Govindwar, S. P. (2010). “Degradation of Orange 3R, mixture of dyes and textile effluent and production of polyhydroxyalkanoates from biomass obtained after degradation.” Int. Biodeter. Biodegr., 64(8), 755–763.
Vepsalainen, M., Kivisaari, H., Pulliainen, M., Oikari, A., and Sillanpaa, M. (2011). “Removal of toxic pollutants from pulp mill effluents by electrocoagulation.” Sep. Purif. Technol., 81(2), 141–150.
Zhang, X. D., et al. (2009). “Synergistic effect in treatment of C.I. Acid Red 2 by electrocoagulation and electrooxidation.” J. Hazard. Mater., 170(2–3), 883–887.
Information & Authors
Information
Published In
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Oct 9, 2012
Accepted: Mar 5, 2013
Published online: Dec 16, 2013
Published in print: Jan 1, 2014
Discussion open until: May 16, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.