Service Life of HDPE Geomembranes Subjected to Elevated Temperatures
Publication: Journal of Hazardous, Toxic, and Radioactive Waste
Volume 18, Issue 1
Abstract
Subtitle D landfills may experience elevated temperatures for a variety of reasons such as hydration of combustion ash, waste biodegradation with and without leachate recirculation, aluminum production waste and combustion ash reactions, and wastes received with elevated temperature. Elevated temperatures can reduce service life or effectiveness of high density polyethylene (HDPE) geomembranes by accelerating antioxidant depletion of geomembranes and polymer degradation. A case history is presented to illustrate the potential effects of elevated temperatures and time-temperature history on a HDPE geomembrane and the associated reduction in service life or effectiveness. The geomembrane service life was influenced by the peak temperature, e.g., 60–80°C, the duration of peak temperatures (time-temperature history), and the time to complete antioxidant depletion. This paper also discusses possible criteria for assessing the service life of geomembranes, such as applicable engineering properties, locations for service life assessments, definitions of geomembrane service life, and measures that could be adopted if service life were reduced significantly.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This material is based upon work supported by the National Science Foundation (NSF) through a Graduate Research Fellowship to Navid H. Jafari. Any opinions, findings, conclusions, or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the NSF.
References
Adams, F. T., Overmann, L. K., and Cotton, R. L. (1997). “Evaluation and remediation of a fire damaged geosynthetic liner system.” Proc., Geosynthetics ‘97, Industrial Fabric Association International (IFAI), Roseville, MN, 379–392.
ASTM. (2006). “Standard test method for oxidative induction time of polyolefins geosynthetics by high-pressure differential scanning calorimetry.” D5885, West Conshohocken, PA.
ASTM. (2007). “Standard test method for oxidative-induction time of polyolefins by differential scanning calorimetry.” D3895, West Conshohocken, PA.
ASTM. (2008). “Standard practice for air-oven aging of polyolefin geomembranes.” D5721, West Conshohocken, PA.
ASTM. (2010). “Standard test methods for laboratory determination of water (moisture) content of soil and rock by mass.” D2216, West Conshohocken, PA.
Azad, F., Rowe, R. K., El-Zein, A., and Airey, D. (2011). “Laboratory investigation of thermally induced desiccation of GCLs in double composite liner systems.” Geotext. Geomembr., 29(6), 534–543.
Azad, F., El-Zein, A., Rowe, R. K., and Airey, D. (2012). “Modelling of thermally induced desiccation of geosynthetic clay liners in double composite liner systems.” Geotext. Geomembr., 34, 28–38.
Bonaparte, R., Daniel, D. E., and Boutwell, G. P. (2002). Assessment and recommendations for improving the performance of waste containment systems, U.S. Environmental Protection Agency, Washington, DC.
Brune, M., Ramke, H. G., Collins, H., and Hanert, H. H. (1991). “Incrustation process in drainage systems of sanitary landfills.” Proc., 3rd Int. Landfill Symp., CISA publisher, Padova, Italy, 999–1035.
Calder, G. V., and Stark, T. D. (2010). “Aluminum reactions and problems in municipal solid waste landfills.” Pract. Period. Hazard. Toxic Radioact. Waste Manage., 258–265.
Chappel, M. J., Brachman, R. W. I., Take, W. A., and Rowe, R. K. (2012). “Large-scale quantification of wrinkles in a smooth, black, HDPE geomembrane.” J. Geotech. Geoenviron. Eng., 671–679.
Geosynthetic Institute. (1997). Test methods, test properties, testing frequency for high density polyethylene (HDPE) smooth and textured geomembranes, GRI-GM13, Folsom, PA.
Gulec, S. B., Edil, T. B., and Benson, C. H. (2004). “Effect of acidic mine drainage on the polymer properties of an HDPE geomembrane.” Geosynth. Int., 11(2), 60–72.
Hanson, J. L., Yesiller, N., and Kendall, L. A. (2005). “Integrated temperature and gas analysis at a municipal solid waste landfill.” Proc., 16th Int. Conf. on Soil Mechanics and Geotechnical Engineering, Geotechnology in Harmony with the Global Environment, Vol. 4, Millpress Science, Rotterdam, The Netherlands, 2265–2268.
Hanson, J. L., Liu, W.-L., and Yesiller, N. (2008). “Analytical and numerical methodology for modeling temperatures in landfills.” Geotechnics of waste management and remediation, ASCE GSP 177, M. V. Khire, A. N. Alshawabkeh and K. R. Reddy, eds., ASCE, Reston, VA, 24–31.
Hanson, J. L., Yesiller, N., and Oettle, N. K. (2010). “Spatial and temporal temperature distribution in municipal solid waste landfills.” J. Environ. Eng., 804–814.
Hoor, A., and Rowe, R. K. (2012). “Application of tire chips to reduce the temperature of secondary geomembranes in municipal solid waste landfills.” Waste Manage., 32(5), 901–911.
Hoor, A., and Rowe, R. K. (2013). “Potential for desiccation of geosynthetic clay liners used in barrier systems.” J. Geotech. Geoenviron. Eng., 1648–1664.
Hsuan, Y. G., and Koerner, R. M. (1995). “The single point-notched constant tensile load test: A quality control test for assessing stress crack resistance.” Geosynthet. Int., 2(5), 831–843.
Hsuan, Y. G., and Koerner, R. M. (1998). “Antioxidant depletion lifetime in high density polyethylene geomembranes.” J. Geotech. Geoenviron. Eng., 532–541.
Jeon, H.-Y., Bouazza, A., and Lee, K.-Y. (2008). “Depletion of antioxidants from an HDPE geomembrane upon exposure to acidic and alkaline solutions.” Polymer Test., 27(4), 434–440.
Klein, R., Baumann, T., Kahapka, E., and Niessner, R. (2001). “Temperature development in a modern municipal solid waste incineration (MSWI) bottom ash landfill with regard to sustainable waste management.” J. Hazard. Mater., 83(3), 265–280.
Koerner, R. M. (1998). Designing with geosynthetics, 4th Ed., Prentice-Hall, Englewood Cliffs, NJ.
Koerner, G. R., and Koerner, R. M. (2006). “Long-term temperature monitoring of geomembranes at dry and wet landfills.” Geotext. Geomembr., 24(1), 72–77.
Koerner, R. M., Koerner, G. R., Eith, A. W., and Ballod, C. P. (2008). “Geomembrane temperature monitoring at dry and wet landfills.” Proc., 1st Global Waste Management Symp. (CD-ROM), National Solid Waste Management Association (NSWMA), Washington, DC.
Martin, J. W., Stark, T. D., Thalhamer, T., Gerbasi, G. T., and Gortner, R. E. (2013). “Detection of aluminum waste reactions and associated waste fires.” J. Hazard. Toxic Radioact. Waste, 164–174.
Manfredi, O., Wuth, W., and Bohlinger, I. (1997). “Characterizing the physical and chemical properties of aluminum dross.” JOM, 49(11), 48–51.
Müller, W., and Jacob, I. (2003). “Oxidative resistance of high density polyethylene geomembranes.” Polym. Degrad. Stab., 79(1), 161–172.
Needham, A. D., Smith, J. W. N., and Gallagher, E. M. G. (2006). “The service life of polyethylene geomembrane barriers.” Eng. Geol., 85(1–2), 82–90.
Ontario Ministry of the Environment. (1998). Landfill standards: A guideline on the regulatory and approval requirements for the new or expanding landfilling sites, Ontario Regulation 232/98, Ontario Ministry of the Environment, Queen’s Printer for Ontario, Toronto, Canada.
Rimal, S., and Rowe, R. K. (2009). “Diffusion modelling of OIT depletion from HDPE geomembrane in landfill applications.” Geosynthet. Int., 16(3), 183–196.
Rowe, R. K. (2005). “Long-term performance of contaminant barrier systems: 45th Rankine lecture.” Geotechnique, 55(9), 631–678.
Rowe, R. K. (2012). “Short- and long-term leakage through composite liners. The 7th Arthur Casagrande Lecture.” Can. Geotech. J., 49(2) 141–169.
Rowe, R. K., and Hoor, A. (2009). “Predicted temperatures and service lives of secondary geomembrane landfill liners.” Geosynthet. Int., 16(2), 71–82.
Rowe, R. K., Hoor, A., and Pollard, A. (2010). “Numerical examination of a method for reducing the temperature of municipal solid waste landfill liners.” J. Environ. Eng., 794–803.
Rowe, R. K., and Islam, M. Z. (2009). “Impact on landfill liner time-temperature history on the service-life of HDPE geomembranes.” Waste Manage., 29(10), 2689–2699.
Rowe, R. K., Islam, M. Z., Brachman, R. W. I., Arnepalli, D. N., and Ewais, A. (2010). “Antioxidant depletion from an HDPE geomembrane under simulated landfill conditions.” J. Geotech. Geoenviron. Eng., 930–939.
Rowe, R. K., Islam, M. Z., and Hsuan, Y. G. (2008). “Leachate chemical composition effects on OIT depletion in HDPE geomembranes.” Geosynthet. Int., 15(2), 136–151.
Rowe, R. K., Quigley, R. M., Brachman, R. W. I., and Booker, J. R. (2004). Barrier systems for waste disposal facilities, Taylor & Francis, London.
Rowe, R. K., and Rimal, S. (2008a). “Aging of HDPE geomembrane in three composite liner configurations.” J. Geotech. Geoenviron. Eng., 906–916.
Rowe, R. K., and Rimal, S. (2008b). Ageing and long-term performance of geomembrane liners, GeoAmericas 2008, Industrial Fabrics Association International, Cancun, Mexico, 425–434.
Rowe, R. K., Rimal, S., and Sangam, H. P. (2009). “Ageing of HDPE geomembrane exposed to air, water and leachate at different temperatures.” Geotext. Geomembr., 27(2), 137–151.
Sangam, H. P., and Rowe, R. K. (2002). “Effects of exposure conditions on the depletion of antioxidants from high-density polyethylene HDPE geomembranes.” Can. Geotech. J., 39(6), 1221–1230.
Shinzato, M. C., and Hypolito, R. (2005). “Solid waste from aluminum recycling process: characterization and reuse of its economically valuable constituents.” Waste Manage. J., 25(1), 37–46.
Southen, J. M., and Rowe, R. K. (2004). “Investigation of the behavior of geosynthetic clay liners subjected to thermal gradients in basal liner applications.” J. ASTM Int., 1(2), JAI11470.
Southen, J. M., and Rowe, R. K. (2005a). “Laboratory investigation of geosynthetic clay liner desiccation in a composite liner subjected to thermal gradients.” J. Geotech. Geoenviron. Eng., 925–935.
Southen, J. M., and Rowe, R. K. (2005b). “Modelling of thermally induced desiccation of geosynthetic clay liners.” Geotext. Geomembr., 23(5), 425–442.
Southen, J. M., and Rowe, R. K. (2011). “Numerical modelling of thermally induced desiccation of geosynthetic clay liners observed in laboratory experiments.” Geosynthet. Int., 18(5), 289–303.
Stark, T., Martin, J., Gerbasi, G., Thalhamer, T., and Gortner, R. (2012). “Aluminum waste reaction indicators in an municipal solid waste (MSW) landfill.” J. Geotech. Geoenviron. Eng., 138(3), 252–261.
Szczygielski, T. (2007). “Fire in the hole: Aluminum dross in landfills.” Waste Manage. J. Nat. Resour. Environ. Law, 22(2), 159–174.
Tarnowski, C., Baldauf, S., and Sost, E. (2005). “Assessment of the durability of HDPE-geomembranes in landfills: Practical approach under consideration of material examination performed during service life.” Proc., 10th Int. Waste Management and Landfill Symp. (CD-ROM), CISA publisher, Padolva, Italy.
U.S. DOE. (1999). Recycling of aluminum dross/saltcake, Aluminum Project Fact Sheet, Office of Industrial Technologies Energy Efficiency and Renewable Energy, Washington, DC.
Viebke, J., Elble, E., Ifwarson, M., and Gedde, U. W. (1994). “Degradation of unstabilized medium-density polyethylene pipes in hot-water applications.” Polym. Eng. Sci., 34(17), 1354–1361.
Yesiller, N., Hanson, J. L., and Liu, W. L. (2005). “Heat generation in municipal solid waste landfills.” J. Geotech. Geoenviron. Eng., 131(11), 1330–1344.
Yoshida, H., and Rowe, R. K. (2003). “Consideration of landfill liner temperature.” Proc., 9th Int. Waste Management and Landfill Symp. (CD-ROM), CISA publisher, Padolva, Italy.
Information & Authors
Information
Published In
Journal of Hazardous, Toxic, and Radioactive Waste
Volume 18 • Issue 1 • January 2014
Pages: 16 - 26
Copyright
© 2014 American Society of Civil Engineers.
History
Received: Apr 26, 2012
Accepted: Feb 7, 2013
Published online: Feb 9, 2013
Discussion open until: Jul 9, 2013
Published in print: Jan 1, 2014
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.