On the Flexural Analysis of Sandwich and Composite Arches through an Isoparametric Higher-Order Model
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Engineering Mechanics
Volume 135, Issue 7
Abstract
A higher-order arch model with seven degrees of freedom per node is proposed to study the deep, shallow, thick, and thin composite and sandwich arches under static loads. The strain field is modeled through cubic axial, cubic transverse shear, and linear transverse normal strain components. As the cross-sectional warping is accurately modeled by this theory, it does not require any shear correction factor. The stress-strain relationship is derived from an orthotropic lamina in a three-dimensional state of stress. The proposed formulation is validated through models with various curvatures, aspect ratios, boundary conditions, materials, and loading conditions.
Get full access to this article
View all available purchase options and get full access to this article.
References
Allen, H. G. (1969). Analysis and design of structural sandwich panels, Pergamon Press, London.
Babu, C. R., and Prathap, G. (1986). “A linear thick curved beam element.” Int. J. Numer. Methods Eng., 23(7), 1313–1328.
Balasubramanian, T. S., and Prathap, G. (1989). “A field consistent higher-order curved beam element for static and dynamic analysis of stepped arches.” Comput. Struct., 33(1), 281–288.
Bathe, K. J. (1982). Finite element procedures in engineering analysis, Prentice-Hall, N.J.
Cevik, M. (2007). “An elastic-plastic thermal stress analysis of cross-ply and angle-ply aluminum metal-matrix composite arches.” J. Reinf. Plast. Compos., 26(2), 169–181.
Chen, J. K., and Sun, C. T. (1985). “Nonlinear transient responses of initially stressed composite plates.” Comput. Struct., 21(3), 513–520.
Choi, J. K., and Lim, J. K. (1995). “General curved beam elements based on the assumed strain fields.” Comput. Struct., 55(3), 379–386.
Cowper, G. R. (1966). “The shear coefficient in Timoshenko beam theory.” J. Appl. Mech., 33(2), 335–340.
Dawe, D. J. (1974a). “Curved finite elements for the analysis of shallow and deep arches.” Comput. Struct., 4(3), 559–580.
Dawe, D. J. (1974b). “Numerical studies using circular arch finite elements.” Comput. Struct., 4(4), 729–740.
Ganapathi, M., Patel, B. P., Saravanan, J., and Touratier, M. (1999). “Shear flexible curved spline beam element for static analysis.” Finite Elem. Anal. Design, 32(3), 181–202.
Gere, J. M., and Weaver, W. (1965) Analysis of Framed Structures, D. Van Nostrand Company, New York, 450.
Jones, R. M. (1975). Mechanics of composite materials, McGraw-Hill Kogakusha, Tokyo.
Kikuchi, F., and Tanizawa, K. (1984). “Accuracy and locking free property of beam element for arch problems.” Comput. Struct., 19(1–2), 103–110.
Kim, D., and Chaudhuri, R. A. (2009). “Post buckling behavior of symmetrically laminated thin shallow circular arches.” Compos. Struct., 87(1), 101–108.
Krishnan, A., and Suresh, Y. J. (1998). “A simple cubic linear element for static and free vibration analyses of curved beams.” Comput. Struct., 68(5), 473–489.
Kulikov, G. M., and Plotnikova, S. V. (2004). “Non-conventional non-linear two-node hybrid stress-strain curved beam elements.” Finite Elem. Anal. Design, 40(11), 1333–1359.
Lee, H. P. (1969). “Generalized stiffness matrix of a curved-beam element.” AIAA J., 7(10), 2043–2045.
Lee, P. G., and Sin, H. C. (1994). “Locking-free curved beam element based on curvature.” Int. J. Numer. Methods Eng., 37(6), 989–1007.
Litewka, P., and Rakowski, J. (1998). “The exact thick arch finite element.” Comput. Struct., 68(4), 369–379.
Lo, K. H., Christensen, R. M., and Wu, E. M. (1977). “A higher-order theory of plate deformation. Part 1: Homogenous plates.” J. Appl. Mech., 44(4), 663–668.
Malekzadeh, P. (2009) “A two-dimensional layerwise-differential quadrature static analysis of thick laminated composite circular arches.” Appl. Math. Model., 33(4), 1850–1861.
Matsunaga, H. (2003). “Interlaminar stress analysis of laminated composite and sandwich circular arches subjected to thermal/ mechanical loading.” Compos. Struct., 60(3), 345–358.
Prathap, G. (1985). “The curved beam/deep arch/finite ring element revisited.” Int. J. Numer. Methods Eng., 21(3), 389–407.
Prathap, G., and Babu, C. R. (1986). “An isoparametric quadratic thick curved beam element.” Int. J. Numer. Methods Eng., 23(9), 1583–1600.
Prathap, G., and Babu, C. R. (1987). “Field-consistency and violent stress oscillations in the finite element method.” Int. J. Numer. Methods Eng., 24(10), 2017–2033.
Prathap, G., and Shashirekha, B. R. (1993). “Variationally correct assumed strain field for the simple curved beam element.” Comput. Struct., 47(6), 1071–1073.
Qatu, M. S. (2004). Vibration of laminated shells and plates, Elsevier, Oxford.
Raveendranath, P., Singh, G., and Pradhan, B. (2000). “Application of coupled polynomial displacement fields to laminated beam elements.” Comput. Struct., 78(5), 661–670.
Reddy, J. N. (1982). “On the solutions to forced motions of rectangular composite plates.” J. Appl. Mech., 49(3), 403–408.
Saleeb, A. F., and Chang, T. Y. (1987). “On the hybrid-mixed formulation of curved beam elements.” Comput. Methods Appl. Mech. Eng., 60(1), 95–121.
Stolarski, H., and Belytschko, T. (1982). “Membrane locking and reduced integration for curved elements.” J. Appl. Mech., 49(1), 172–176.
Stolarski, H., and Belytschko, T. (1983). “Shear and membrane locking in curved elements.” Comput. Methods Appl. Mech. Eng., 41(3), 279–296.
Stolarski, H. K., and Chiang, M. Y. M. (1989). “The mode decomposition formulation of curved two-dimensional structural elements.” Int. J. Numer. Methods Eng., 28(1), 145–154.
Timoshenko, S. P. (1921). “On the correction for shear in differential equation for transverse vibrations of prismatic bars.” Philos. Mag., 41(6), 744–746.
Vinayak, R. U., Prathap, G., and Naganarayana, B. P. (1996). “Beam elements based on a higher-order theory. I: Formulation and analysis of performance.” Comput. Struct., 58(4), 775–789.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Feb 9, 2008
Accepted: Nov 9, 2008
Published online: Mar 6, 2009
Published in print: Jul 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.