Shear Behavior of Precast Concrete Segmental Beams with External Tendons
Publication: Journal of Bridge Engineering
Volume 23, Issue 8
Abstract
Precast concrete segmental beams (PCSBs) with external tendons have become more and more popular all over the world for achieving the advantage of rapid construction. This paper focuses on the effects of shear span-depth ratios, joint types (monolithic, dry, and epoxy), joint number, and joint location on the shear behavior of PCSBs with external tendons. A total of 14 specimens with external tendons were fabricated and tested, which included three monolithic specimens, six segmental specimens with dry joints, and five segmental specimens with epoxy joints. The crack propagation, failure mode, deflection, and stresses of prestressing strands were recorded. It was found that joint location plays an important role in the shear strength of PCSBs with dry joints when compared with monolithic specimens. The failure processes and failure modes of PCSBs were independent of joint types. The experimental results also revealed that the joint number had an effect on the deflection and stress of external tendons. Specifically, the shear behavior of PCSBs with dry joints had no evident difference from that with epoxy joints. The strength of beams with external tendons was predicted using the strut-and-tie model. AASHTO and Chinese codes conservatively predicted the shear strength of PCSBs with external tendons when the shear span-depth ratio was less than 2.5. The actual prestressing force in external tendons can accurately predict the ultimate strength of beams with external tendons at different shear span ratios.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The research presented was sponsored by the Science and Technology grant scheme of the Natural Science Foundation of Guangdong Province in China (2016A030313699); the Science and Technology Planning Project of Guangdong Province (201613050501004); and the Science Foundation of State Key Lab of Subtropical Building Science, South China University of Technology (2016KA03). Visits to Guangdong University of Technology, China, by the fourth author were made possible by the Department of Civil and Environmental Engineering of the University of Tennessee, Knoxville, Tennessee.
References
AASHTO. 2003. Guide specifications for the design and construction of segmental concrete bridges. Washington, DC.
AASHTO. 2014. Standard specifications for highway bridges. Washington, DC.
ACI Committee 318. 2014. Building code requirements for structural concrete (ACI 318-14). Farmington Hills, MI: American Concrete Institute.
Aparicio, A. C., G. Ramos, and J. R. Casas. 2002. “Testing of externally prestressed concrete beams.” Eng. Struct. 24 (1): 73–84. https://doi.org/10.1016/S0141-0296(01)00062-1.
Base, G. D. 1963. “Shearing tests on thin epoxy-resin joints between precast concrete units.” Concr. Constr. Eng. 58 (7): 273–277.
Buyukozturk, O., M. M. Bakhoum, and S. M. Beattie. 1990. “Shear behavior of joints in precast concrete segmental bridges.” J. Struct. Eng. 116 (12): 3380–3401.https://doi.org/10.1061/(ASCE)0733-9445(1990)116:12(3380).
Corven, J. A. 1993. “Overview on external prestressing in the world application in North America.” External Prestressing in Structures, 43–52. Paris: Association Francaise Pour la Construction.
Eibl, J. 1993. “An overview on external prestressing in Germany.” External Prestressing in Structures, 53–70. Paris: Association Francaise Pour la Construction.
Foure, B., Y. Bouafia, R. Soubret, and P. Thomas. 1993. “Shear test on keyed joints between precast segments.” In Proc., Workshop AFPC External Prestressing in Structures, 297–319. Saint-Rémy-lès-Chevreuse, (in France).
Franz, G. 1959. Versuche über die querkraftaufnahme in fugen von spannbetonträgen aus fertigteilen. 54 (6): 137–140. [In German.] Beton-und Stahlbetonbau.
Harajli, M. H. 1993. “Strengthening of concrete beams by external prestressing.” PCI J. 38 (6): 76–88. https://doi.org/10.15554/pcij.11011993.76.88.
Jiang, H., Q. Cao, A. Liu, T. Wang, and Y. Qiu. 2016a. “Flexural behavior of precast concrete segmental beams with hybrid tendons and dry joints.” Constr. Build. Mater., 110: 1–7.https://doi.org/10.1016/j.conbuildmat.2016.02.003.
Jiang, H., R. Wei, Z. John Ma, Y. Li, and Y. Jing. 2016b. “Shear strength of steel fiber-reinforced concrete dry joints in precast segmental bridges.” J. Bridge Eng. 21 (11): 4016085. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000968.
Koseki, K., and J. E. Breen. 1983. Overview on external prestressing in the world application in North America. Research Rep. No. 248-1. Austin, TX: Texas State Dept. of Highways and Public Transportation, Center for Transportation Research, Bureau of Engineering Research, Univ. of Texas at Austin.
Li, G. 2007. “Experimental study on the shear behavior of simply-supported externally prestressed concrete beams.” [In Chinese.] China Civ. Eng. J. 40 (2): 58–63.
Li, G., D. Yang, and Y. Lei. 2013a. “Combined shear and bending behavior of joints in precast concrete segmental beams with external tendons.” J. Bridge Eng. 18 (10): 1042–1052. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000453.
Li, G. P., C. L. Zhang, and C. Y. Niu. 2013b. “Experimental study on shear behavior in negative moment regions of segmental externally prestressed concrete continuous beams.” J. Bridge Eng. 18 (4): 328–338. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000351.
Ministry of Transport of the People’s Republic of China. 2004. Code for design of highway reinforced concrete and prestressed concrete bridges and culverts. JTG D62-2004. [In Chinese.] Beijing: China Communications Press.
Moustafa, S. E. 1974. “Ultimate load test of a segmentally constructed prestressed concrete I-beam.” PCI J. 19 (4): 54–75. https://doi.org/10.15554/pcij.07011974.54.75.
Muller, J. 1993. “Some recent international projects with external prestressing.” External Prestressing in Structures, 71–83. Paris: Association Francaise Pour la Construction.
Qi, J., Z. J. Ma, J. Wang, and T. Liu. 2016. “Post-cracking shear strength and deformability of HSS-UHPFRC beams.” Struct. Concr. 17 (6): 1033–1046. https://doi.org/10.1002/suco.201500191.
Rabbat, B. G., and K. Sowlat. 1987. “Testing of segmental concrete girders with external tendons.” PCI J. 32 (2): 86–107. https://doi.org/10.15554/pcij.03011987.86.107.
Ramírez, G., R. Macgregor, M. E. Kreger, C. Roberts-Wollmann, and J. E. Breen. 1993. “Shear strength of segmental structures.” External Prestressing in Structures, 287–296. Paris: Association Française pour la Construction.
Rombach, G., A. Specker, X. Zhou, N. Mickleborough, Z. Li, J. Turmo, G. Ramos, and Á. C. Aparicio. 2005. “Shear strength of joints in precast concrete segmental bridges.” ACI Struct. J. 102 (1): 901–904.
Sivaleepunth, C., J. Niwa, B. K. Diep, S. Tamura, and Y. Hamada. 2006. “Prediction of tendon stress and flexural strength of externally prestressed concrete beams.” Doboku Gakkai Ronbunshuu E. 62 (1): 260–273. https://doi.org/10.2208/jsceje.62.260.
Tan, K., and C. Ng. 1997. “Effects of deviators and tendon configuration on behavior of externally prestressed beams.” ACI Struct. J. 94 (1): 13–22.
Tan, K., and C. Ng. 1998. “Effect of shear in externally prestressed beams.” Struct. J. 95 (2): 116–128.
Turmo, J., G. Ramos, and A. C. Aparicio. 2006b. “Shear strength of dry joints of concrete panels with and without steel fibres: Application to precast segmental bridges.” Eng. Struct. 28 (1): 23–33.https://doi.org/10.1016/j.engstruct.2005.07.001.
Turmo, J., G. Ramos, and Á. C. Aparicio. 2006a. “Shear behavior of unbonded post-tensioned segmental beams with dry joints.” ACI Struct. J. 103 (3): 409–417.
Virlogeux, M. 1993. “External prestressing historical and modern applications.” External Prestressing in Structures, 13–35. Paris: Association Francaise Pour la Construction.
Yuan, A. M., H. Dai, D. S. Sun, and J. J. Cai. 2013. “Behaviors of segmental concrete box beams with internal tendons and external tendons under bending.” Eng. Struct. 48: 623–634. https://doi.org/10.1016/j.engstruct.2012.09.005.
Yuan, A. M., Y. He, H. Dai, and L. K. Cheng. 2015. “Experimental study of precast segmental bridge box girders with external unbonded and internal bonded posttensioning under monotonic vertical loading.” J Bridge Eng. 20 (4): 04014075. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000663.
Zegler, C., and H. Rusch. 1961. Der einfuss von fugen auf die feistigkeit von fertigteilen. 56 (10): 234–237. [In German.] Beton-und Stahlebetonbau.
Zwoyer, E. M., and C. P. Siess. 1954. “Ultimate strength in shear of simply-supported prestressed concrete beams without web reinforcement.” J. Proc. 51 (10): 181–200.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Jul 19, 2017
Accepted: Dec 28, 2017
Published online: May 17, 2018
Published in print: Aug 1, 2018
Discussion open until: Oct 17, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.