Modeling for Assessment of Long-Term Behavior of Prestressed Concrete Box-Girder Bridges
Publication: Journal of Bridge Engineering
Volume 23, Issue 3
Abstract
Large-span prestressed concrete (PC) box-girder bridges suffer excessive vertical deflections and cracking. Recent serviceability failures in China show that the current Chinese standard modeling approach fails to accurately predict long-term deformations of large box-girder bridges. This hinders the efforts of inspectors to conduct satisfactory structural assessments and make decisions on potential repair and strengthening. This study presents a model-updating approach that aims to assess the models used in the current Chinese standard and improve the accuracy of numerical modeling of the long-term behavior of box-girder bridges, calibrated against data obtained from a bridge in service. A three-dimensional finite-element model representing the long-term behavior of box-girder sections is initially established. Parametric studies are then conducted to determine the relevant influencing parameters and to quantify the relationships between those and the behavior of box-girder bridges. Genetic algorithm optimization, based on the response-surface method (RSM), is used to determine realistic creep and shrinkage levels and prestress losses. The modeling results correspond well with the measured historic deflections and the observed cracks. This approach can lead to more accurate bridge assessments, which result in safer strengthening and more economic maintenance plans.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors acknowledge the financial support of the Research Fund for the Doctoral Program of Higher Education of China (Grant 20125522120001).
References
ACI Committee 209 (American Concrete Institute). (2008). “Guide for modeling and calculating shrinkage and creep in hardened concrete.” ACI 209.2R-08, Farmington Hills, MI.
ADINA 8.5 [Computer software]. ADINA R & D, Inc., Watertown, MA.
ADINA R & D, Inc. (2001). ADINA theory and modeling guide, Watertown, MA.
Barthélémy, J. F., Sellin, J., and Torrenti, J. (2015). “The effects of long-term behavior of both concrete and prestressing tendons on the delayed deflection of a prestressed structure.” Proc., 10th Int. Conf. Creep, Shrinkage and Durability Mechanics of Concrete and Concrete Structures (CONCREEP-10), ASCE, Reston, VA, 621–630.
Bažant, Z., and Xi, Y. (1995). “Continuous retardation spectrum for solidification theory of concrete creep.” J. Eng. Mech., 281–288.
Bažant, Z., and Yu, Q. (2013). “Relaxation of prestressing steel at varying strain and temperature: Viscoplastic constitutive relation.” J. Eng. Mech., 814–823.
Bažant, Z., Yu, Q., and Li, G. (2012a). “Excessive long-time deflections of prestressed box girders. I: Record-span bridge in Palau and other paradigms.” J. Struct. Eng., 676–689.
Bažant, Z., Yu, Q., and Li, G. (2012b). “Excessive long-time deflections of prestressed box girders. II: Numerical analysis and lessons learned.” J. Struct. Eng., 687–696.
Bažant, Z. P., and Baweja, S. (2000). “Creep and shrinkage prediction model for analysis and design of concrete structures-model B3.” Creep and shrinkage prediction model for analysis and design of concrete structures: Model B3, 194, A. Al-Manaseer, ed., American Concrete Institute, Farmington Hills, MI, 1–84.
Caglar, N., Demir, A., Ozturk, H., and Akkaya, A. (2015). “A simple formulation for effective flexural stiffness of circular reinforced concrete columns.” Eng. Appl. Artif. Intell., 38(Feb), 79–87.
CEB-FIP (Comité Euro-International du Béton–Fédération International de la Précontrainte). (1990). CEB-FIP model code for concrete structures, Thomas Telford, London.
Chakraborty, S., and Sen, A. (2014). “Adaptive response surface based efficient finite element model updating.” Finite Elem. Anal. Des., 80(Mar), 33–40.
Cheng, J. (2010). “Optimum design of steel truss arch bridges using a hybrid genetic algorithm.” J. Constr. Steel Res., 66(8–9), 1011–1017.
Deng, L., and Cai, C. S. (2009). “Identification of parameters of vehicles moving on bridges.” Eng. Struct., 31(10), 2474–2485.
El Ansary, A. M., El Damatty, A. A., and Nassef, A. O. (2010). “A coupled finite element genetic algorithm technique for optimum design of steel conical tanks.” Thin Walled Struct., 48(3), 260–273.
Elbadry, M., Ghali, A., and Gayed, R. (2014). “Deflection control of prestressed box girder bridges.” J. Bridge Eng., 04013027.
fib (Fédération international du béton). (2013). Fib model code for concrete structures 2010, Wilhelm Ernst & Sohn, Berlin.
Guo, T., and Chen, Z. (2016). “Deflection control of long-span PSC box-girder bridge based on field monitoring and probabilistic FEA.” J. Perform. Constr. Facil., 04016053.
Guo, T., Sause, R., Frangopol, D., and Li, A. (2011). “Time-dependent reliability of PSC box-girder bridge considering creep, shrinkage, and corrosion.” J. Bridge Eng., 29–43.
Jirásek, M., and Havlásek, P. (2014). “Accurate approximations of concrete creep compliance functions based on continuous retardation spectra.” Comput. Struct., 135(Apr), 155–168.
Křístek, V., Bažant, Z. P., Zich, M., and Kohoutková, A. (2006). “Box girder bridge deflections: Why is the initial trend deceptive?” ACI Concr. Int., 28(1), 55–63.
Lou, T., Lopes, S. M., and Lopes, A. V. (2014). “A finite element model to simulate long-term behavior of prestressed concrete girders.” Finite Elem. Anal. Des., 81(Apr), 48–56.
Malm, R., and Sundquist, H. (2010). “Time-dependent analyses of segmentally constructed balanced cantilever bridges.” Eng. Struct., 32(4), 1038–1045.
MATLAB R2016a [Computer software]. MathWorks, Natick, MA.
Midas Civil 7.8 [Computer software]. Seongnam, Korea.
MIDAS Information Technology. (2011). “On-line manual: Civil structure design system.” ⟨http://manual.midasuser.com/EN_TW/civil/791/index.htm⟩ (Mar. 10, 2015).
Ministry of Transport of China. (2004). “Code for design of highway reinforced concrete and prestressed concrete bridges and culverts.” JTG D62-2004, Beijing (in Chinese).
Moore, H. (2014). MATLAB for engineers, Pearson, Essex, U.K.
Norachan, P., Kim, K., and Oñate, E. (2014). “Analysis of segmentally constructed prestressed concrete bridges using hexahedral elements with realistic tendon profiles.” J. Struct. Eng., 04014028.
Pan, Z., Li, B., and Lu, Z. (2013). “Re-evaluation of CEB-FIP 90 prediction models for creep and shrinkage with experimental database.” Constr. Build. Mater., 38(Jan), 1022–1030.
RILEM Technical Committee. (2015). “RILEM draft recommendation: TC-242-MDC multi-decade creep and shrinkage of concrete: Material model and structural analysis.” Mater. Struct., 48(4), 753–770.
Robertson, I. N. (2005). “Prediction of vertical deflections for a long-span prestressed concrete bridge structure.” Eng. Struct., 27(12), 1820–1827.
Shahidi, S., and Pakzad, S. (2014). “Generalized response surface model updating using time domain data.” J. Struct. Eng., A4014001.
Sousa, H., Bento, J., and Figueiras, J. (2013). “Construction assessment and long-term prediction of prestressed concrete bridges based on monitoring data.” Eng. Struct., 52(Jul), 26–37.
Xu, T., Xiang, T., Zhao, R., Yang, G., and Yang, C. (2016). “Stochastic analysis on flexural behavior of reinforced concrete beams based on piecewise response surface scheme.” Eng. Fail. Anal., 59(Jan), 211–222.
Yang, I. H. (2005). “Uncertainty and updating of long-term prediction of prestress forces in PSC box girder bridges.” Comput. Struct., 83(25–26), 2137–2149.
Yao, H., and Wen, Y. (1996). “Response surface method for time-variant reliability analysis.” J. Struct. Eng., 193–201.
Zhu, B. F. (2014). Thermal stresses and temperature control of mass concrete, Elsevier, Amsterdam, Netherlands.
Information & Authors
Information
Published In
Copyright
© 2018 American Society of Civil Engineers.
History
Received: Jan 17, 2017
Accepted: Sep 26, 2017
Published online: Jan 5, 2018
Published in print: Mar 1, 2018
Discussion open until: Jun 5, 2018
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.