Valve-Controlled Segments in Water Distribution Systems
Publication: Journal of Water Resources Planning and Management
Volume 133, Issue 2
Abstract
Subsystem identification in water distribution systems is important for repairing pipes and containing damages. In this paper, a method is proposed to identify the smallest subsections of a network called segments that are enclosed between valves suited to isolation. A dual network representation in terms of segments as nodes and valves as links permit easy visualization of segment expansion resulting from progressive valve failures. Segment deletions often lead to the disconnection of other parts of a network from supply. A technique is presented to track these unintended isolations. The algorithms are applied to a sample network illustrating the various aspects.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers are grateful to American Water Works Association Research Foundation and Weston Solutions, Inc. for supporting this research. The writers wish to thank Dr. A. K. Deb, Mr. J. K. Snyder, Mr. John Hammell, and Ms. S. McCammon of Weston Solutions, Inc., and Dr. W. M. Grayman, Walter Grayman Consulting Engineer for many insightful discussions. The writers also thank the anonymous reviewers for their constructive comments.
References
American Water Works Association (AWWA). 1996. “Distribution valves: Selection, installation, field testing, and maintenance (M44).” Denver.
Billinton, R., and Allan, R. N. (1992). Reliability evaluation of engineering systems: Concepts and techniques, Plenum, New York.
BLAST (Basic Linear Algebra Subprograms Technical) Forum Standard (2001). ⟨http://www.netlib.org/blas/blast-forum⟩ (December 25, 2005).
Bouchart, F., and Goulter, I. (1991). “Reliability improvements in design of water distribution networks recognizing valve location.” Water Resour. Res. 27(12), 3029–3040.
Bouchart, F. J-C., Jowitt, P., and Cavil, S. J. (2004). “Delineation of contaminant spread potential over extended time modeling.” Proc., World Water and Environmental Resources Congress (CD-ROM), Salt Lake City.
Davidson, J., Bouchart, F., Cavill, S., and Jowitt, P. (2005). “Real-time connectivity modeling of water distribution networks to predict contamination spread.” J. Comput. Civ. Eng. 19(4), 377–386.
Dossey, J. A., Otto, A. D., Spence, L. E., and Eynden, C. V. (1997). Discrete mathematics, Addison-Wesley, Reading, Mass.
Duff, I. S., Erisman, A. M., and Reid, J. K. (1986). Direct methods for sparse matrices, Oxford Science Publications, New York.
Goulter, I., Walski, T. M., Mays, L. W., Sakarya, B., Bouchart, F., and Tung, Y. K. (2000). “Reliability analysis for design.” Water distribution systems handbook, L. W. Mays, ed. McGraw-Hill, New York.
Hammer, M. J., and Hammer, M. J., Jr. (2001). Water and wastewater technology, 4th Ed., Prentice-Hall, Upper Saddle River, N.J.
Jowitt, P. W., Cavill, S. J., Bouchart, F. J.-C., and Houck, M. H. (2004). “Crisis event flow and contamination modeling with limited data.” Proc., AWWA Infrastructure Management and Technology Conf. (CD-ROM), American Water Works Association, Denver.
Ostfeld, A. (2005). “Water distribution systems connectivity analysis.” J. Water Resour. Plann. Manage. 131(1), 58–66.
Ozger, S., and Mays, L. W. (2004). “Optimal location of isolation valves: A reliability approach.” Water supply systems security, L. W. Mays, ed., McGraw-Hill, New York.
Skousen, P. L. (1997). Valve handbook, McGraw-Hill, New York.
Su, Y. C., Mays, L. W., Duan, N., and Lansey, K. E. (1987). “Reliability-based optimization model for water distribution systems.” J. Hydraul. Eng. 113(12), 1539–1556.
Walski, T. M. (1993a). “Practical aspects of providing reliability in water distribution systems.” Reliab. Eng. Syst. Saf., 42, 13–19.
Walski, T. M. (1993b). “Water distribution valve topology for reliability analysis.” Reliab. Eng. Syst. Saf. 42, 21–27.
Walski, T. M. (2002). “Issues in providing reliability in water distribution systems.” Proc., Environmental and Water Resources Institute (EWRI) Annual Conf. (CD-ROM), ASCE, Roanoke, Va.
Whittaker, A. R., and Arscott, A. W. (1997). “Development of an intelligent valve key to improve identification and control of distribution system valves.” 1997 Annual Conf. Proc., AWWA, 229–237, Atlanta.
Yang, Shu-Li., Hsu, Nien-Shen, Louie, P. W. F., and Yeh, W. W.-G. (1996a). “Water distribution network reliability: Connectivity analysis.” J. Infrastruct. Syst. 2(2), 54–64.
Yang, Shu-Li., Hsu, Nien-Shen., Louie, P. W. F., and Yeh, W. W-G. (1996b). “Water distribution network reliability: Stochastic simulation.” J. Infrastruct. Syst. 2(2), pp. 65–72.
Ysusi, M. (2000). “System design: An overview.” Water distribution systems handbook, L. W. Mays ed., McGraw-Hill, New York.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Sep 23, 2005
Accepted: Nov 14, 2005
Published online: Mar 1, 2007
Published in print: Mar 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.