Measurement of Effective Saturation Concentration for Gas Transfer
Publication: Journal of Hydraulic Engineering
Volume 123, Issue 2
Abstract
Bubbles entrained in the plunge pools of hydraulic structures are subjected to the hydrostatic pressure of the water column. The hydrostatic pressure increases the saturation concentration of gases within the bubbles and correspondingly alters the rates of gas transfer. An “effective saturation concentration” is introduced to account for the elevated pressure within the bubbles. The effective saturation concentration must be incorporated into gas-transfer calculations to accurately predict downstream concentrations of dissolved gases. A method of measuring the effective saturation concentration from simultaneous measurements of dissolved oxygen and methane is presented. The method is verified through similar measurements of dissolved nitrogen and methane. Applications demonstrate the use of the effective saturation concentration in the prediction of dissolved-gas levels downstream of hydraulic structures and the use of dissolved-gas measurements in the determination of the effective saturation concentration.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abernathy, R. B., Benedict, R. P., and Dowdell, R. B.(1985). “ASME measurement uncertainty.”J. Fluids Engrg., 107(2), 161–164.
2.
Bouck, G. R.(1982). “Gasometer: an inexpensive device for continuous monitoring of dissolved gases and supersaturation.”Trans. Am. Fisheries Soc., 111, 379–389.
3.
Cirpka, O., Reichert, R., Wanner, O., Müller, S. R., and Schwarzenbach, R.(1993). “Gas exchange at river cascades: field experiments and model calculations.”Envir. Sci. and Technol., 27(10), 2086–2097.
4.
de Angelis, M. A., and Lilley, M. D.(1987). “Methane in surface waters of Oregon estuaries and rivers.”Limnology and Oceanography, 32(3), 716–722.
5.
Ervine, D. A., and Elsawy, E. M. (1975). “The effect of a falling nappe on river aeration.”Proc., XVI Congr., Int. Assn. for Hydr. Res., IAHR, Delft, The Netherlands, Vol. 3, 390–397.
6.
Falvey, H. T. (1980). “Air-water flow in hydraulic structures.”Engrg. Monograph No. 41, U.S. Bureau of Reclamation, Denver, Colo.
7.
Gameson, A. L. H.(1957). “Weirs and the aeration of rivers.”J. Inst. of Water Engrg., 11, 477–490.
8.
Gulliver, J. S., and Wilhelms, S. C.(1992). “Discussion of `Aeration at Ohio River basin navigation dams,' by S. F. Railsback, J. M. Bownds, M. J. Sak, M. M. Stevens, and G. H. Taylor.”J. Envir. Engrg., 108(3), 444–446.
9.
Gulliver, J. S., and Rindels, A. J.(1993). “Measurement of air-water oxygen transfer at hydraulic structures.”J. Hydr. Engrg., ASCE, 119(3), 328–349.
10.
Hanratty, T. J. (1991). “Effect of gas flow on physical absorption.”Air-water mass transfer, S. C. Wilhelms and J. S. Gulliver, eds., ASCE, New York, N.Y., 10–13.
11.
Hibbs, D. E., and Gulliver, J. S. (1997). “Prediction of an effective saturation concentration at spillway plunge pools.”J. Hydr. Engrg., in press.
12.
Hitchman, M. L. (1978). Measurement of dissolved oxygen. John Wiley and Sons, Inc., New York, N.Y.
13.
Johnson, P. L., and King, D. L. (1975). “Prediction of dissolved gas at hydraulic structures.”Symp. on Reaeration Res., ASCE, New York, N.Y., 76–90.
14.
Levich, V. G. (1962). Physiochemical hydrodynamics. Prentice-Hall, Inc., Englewood Cliffs, N.J.
15.
Lewis, W. K., and Whitman, W. G.(1924). “Principles of gas adsorption.”Industry and Engrg. Chem., 16(12), 1215–1220.
16.
Lyman W. J., Reehl, W. F., and Rosenblatt, D. H. (1990). Handbook of chemical property estimation methods. American Chemical Society, Washington, D.C.
17.
Mackay, D., Shiu, W. Y., Valsaraj, K. T., and Thibodeaux, L. (1991). “Air-water transfer: the role of partitioning.”Air-water mass transfer, S. C. Wilhelms and J. S. Gulliver, eds., ASCE, New York, N.Y., 34–56.
18.
McDonald, J. P., and Gulliver, J. S. (1992). “Methane tracer technique for gas transfer at hydraulic structures.”St. Anthony Falls Hydr. Lab. Proj. Rep. 325, Univ. of Minnesota, Minneapolis, Minn.
19.
Motarjemi, M., and Jameson, G. J.(1978). “Mass transfer from very small bubbles—the optimum bubble size for aeration.”Chemical Engrg. Sci., 33, 1415–1423.
20.
Munz, C., and Roberts, P. V.(1989). “Gasand liquid-phase mass transfer resistance of organic compounds during mechanical surface aeration.”Water Res., 23(5), 589–601.
21.
Parkhill, K. L. (1994). “Measurement of air-water mass transfer at hydraulic structures,” MS thesis, Univ. of Minnesota, Minneapolis, Minn.
22.
Rathbun, R. E.(1990). “Prediction of stream volatilization coefficients.”J. Envir. Engrg., 116(3), 615–631.
23.
SenSym, Inc. (1989). 1989 solid-state sensor handbook. Sunnyvale, Calif.
24.
Thene, J. R., and Gulliver, J. S. (1990). “Gas transfer measurements using headspace analysis of propane.”J. Envir. Engrg., 116(6), 1107– 1124.
25.
Valsaraj, K. T.(1994). “Hydrophobic compounds in the environment. Adsorption equilibrium at the air-water interface.”Water Res., 28(4), 819–830.
26.
Yellow Springs Instrument Co., Inc. (YSI). (1989). YSI model 58 operating instructions. Yellow Springs, Ohio.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Feb 1, 1997
Published in print: Feb 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.