Analytical Determination of Form Friction Factor
Publication: Journal of Hydraulic Engineering
Volume 109, Issue 4
Abstract
The form friction factors for an idealized series of two‐dimensional bedforms simulating a train of ripples or dunes in alluvial channels are obtained analytically by integrating the pressure along the bedform profiles. The roughness element is assumed to act independently so that the form friction factor can be obtained by analyzing the flow over a single bedform. The pressure distribution along the bedform is obtained by analyzing the incompressible, rotational inviscid flow over a theoretical ripple profile with the help of the Finite Element Method. A family of curves representing the relationship between form friction factor and relative depth with different bedform steepness ratios are numerically obtained. The comparison with the observed data shows a fair agreement.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Annambhotla, V. S., Sayer, W. W., and Livesey, R. H., “Statistical Properties of Missouri River Bed Forms,” Journal of the Waterways, Harbors and Coastal Engineering Division, ASCE, Vol. 98, No. WW4, Nov., 1972, pp. 489–510.
2.
Brooks, N. H., “Mechanics of Streams With Movable Beds of Fine Sands,” Transactions, ASCE, Vol. 123, 1958, pp. 526–594.
3.
Courant, R., and Hilbert, D., Methods of Mathematical Physics, Vol. I, Interscience Publishers, Inc., New York, N.Y., 1953.
4.
Einstein, H. A., and Barbarossa, N., “River Channel Roughness,” Transactions, ASCE, Vol. 117, Paper No. 2528, 1952, pp. 1121–1146.
5.
Goldstein, S., ed., Modern Developments in Fluid Dynamics , Vol. I, Dover Publications, Inc., New York, N.Y., 1965.
6.
Guy, H. P., Simons, D. B., and Richardson, E. V., “Summary of Alluvial Channel Data From Flume Experiments, 1956–61,” Geological Survey Professional Paper No. 462‐I, U.S. Gov't. Printing Office, Washington, D.C., 1966.
7.
Haque, M. I., “Analytically Determined Ripple Shapes,” thesis presented to Colorado State University, at Fort Collins, Colo., in 1970, in partial fulfillment of the requirements for the degree of Master of Science.
8.
Laursen, E. M., “The Total Sediment Load of Streams,” Journal of the Hydraulics Division, ASCE, No. HY1, Feb., 1958, pp. 1530–1 to 1530–6.
9.
Mahmood, K., and Tarar, R. N., “Field Research in Large Sand Bed Channels,” Rivers '76, Symposium On Island Waterways For Navigation, Flood Control, and Water Divisions, Vol. II, ASCE, New York, N.Y., 1976, pp. 1318–1338.
10.
Mahmood, K., and Tarar, R. N., “Design of Research Strategy in ACOP,” Proceedings, Part II, Symposium On the Mechanics of Alluvial Channels, held jointly by U.S. National Science Foundation and Pakistan WAPDA, Lahore, Pakistan, June, 1979.
11.
Mahmood, K., Haque, M. I., and Maqbool, M. A., “Variation of Sediment Concentration and Velocity Profiles Along Bedforms,” Civil, Mechanical and Environmental Engineering Department Report No. EWR‐80‐4, The George Washington University, Washington, D.C., Aug., 1980.
12.
Mahmood, K., Haque, M. I., and Nasseri, F. H., “A Study of Hydraulic Resistance In Sand Bed Channels,” Civil, Mechanical, and Environmental Engineering Department Report No. EWR‐80‐3, The George Washington University, Washington, D.C., Aug., 1980.
13.
Mahmood, K., Haque, M. I., and Tarar, R. N., “Velocity and Shear Stress Along Bedforms,” Civil, Mechanical, and Environmental Engineering Department Report No. EWR‐80‐5, The George Washington University, Washington, D.C., Sept., 1980.
14.
Mercer, A. G., “Analytically Determined Bed‐Form Shape,” Journal of the Engineering Mechanics Division, ASCE, Vol. 97, Feb., 1971, pp. 175–180.
15.
Mercer, A. G., and Haque, M. I., “Ripple Profiles Modeled Mathematically,” Journal of the Hydraulics Division, ASCE, Vol. 99, No. HY3, Mar., 1973, pp. 441–459.
16.
O'Loughlin, E. M., “Resistance To Flow Over Boundaries With Small Roughness Concentrations,” dissertation, presented to the University of Iowa, Iowa City, Iowa, in Aug., 1965, in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
17.
Raudkivi, A. J., “Study of Sediment Ripple Formation,” Journal of the Hydraulics Division, ASCE, Vol. 89, No. HY6, Nov., 1963, pp. 15–33.
18.
Raudkivi, A. J., “Analysis of Resistance in Alluvial Channels,” Journal of the Hydraulics Division, Vol. 93, No. HY5, Sept., 1967, pp. 73–84.
19.
Roberson, J. A., “Flow In Conduits With Low Roughness Concentration,” Journal of the Hydraulics Division, ASCE, Vol. 96, No. HY4, Apr., 1970.
20.
Rouse, H., “Critical Analysis of Open‐Channel Resistance,” Journal of the Hydraulics Division, ASCE, Vol. 91, No. HY4, July, 1965, pp. 1–25.
21.
Sayre, W. W., and Albertson, M. L., “Roughness Spacing In Rigid Open Channels,” Transactions, ASCE, Vol. 128, Part I, 1963, pp. 343–372.
22.
Simons, D. B., and Richardson, E. V., “Resistance To Flow In Alluvial Channels,” Professional Paper 422J, U.S. Geological Survey, Washington, D.C., 1966.
23.
Special Experiments For Field Research, Alluvial Channels Observation Project (ACOP) Report No. 21, Water and Power Development Authority, Lahore, Pakistan.
24.
Vanoni, V. A., and Hwang, L., “Relationship Between Bed Forms and Friction in Streams,” Journal of the Hydraulics Division, ASCE, Vol. 93, No. HY3, May, 1967, pp. 121–144.
25.
Vooren, J. V. D., and Labrujere, Th. E., “Finite Element Solution of the Incompressible Flow Over An Airfoil In a Non‐uniform Stream,” Numerical Methods In Fluid Dynamics, by C. A. Brebbia and J. J. Connor, eds., Crane, Russak & Co., Inc., New York, N.Y., 1973.
Information & Authors
Information
Published In
Copyright
Copyright © 1983 ASCE.
History
Published online: Apr 1, 1983
Published in print: Apr 1983
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.