Simple Mechanical Model of Curved Beams by a 3D Approach
Publication: Journal of Engineering Mechanics
Volume 135, Issue 7
Abstract
Starting from three-dimensional (3D) continuum mechanics, a simple one-dimensional model aimed at analyzing the whole static behavior of nonhomogeneous curved beams is proposed. The kinematics is described by four one-dimensional (unknown) functions representing radial, tangential, and out-of-plane displacements of the beam axis, which are due to flexures and extension, and the twist of the cross section due to torsion. The flexural and axial displacements fit with the classical Euler–Bernoulli beam theory of straight beams, and nonuniform torsion is also considered. The relevant elastogeometric parameters have been determined, and the system of governing equilibrium equations is obtained by means of the principle of minimum potential energy. Finally, the general theory is illustrated with examples.
Get full access to this article
View all available purchase options and get full access to this article.
References
Abramowitz, M., and Stegun, I. A. (1970). Handbook of mathematical functions, Dover, New York.
Antman, S. S. (1995). Nonlinear problems of elasticity, Springer, New York.
Bauchau, O. A., and Hong, C. H. (1987). “Large displacement analysis of naturally curved and twisted composite beams.” AIAA J., 25, 1469–1475.
Berdichevskii, V. L., and Staroselsky, L. A. (1979). “On the theory of naturally twisted curvilinear rods.” Mech. Solids, 6, 87–95.
Borri, M., Ghiringhelli, G. L., and Merlini, T. (1992). “Linear analysis of naturally curved and twisted anisotropic beams.” Composites Eng., 2, 433–456.
Cesnik, C. E. S., and Hodges, D. H. (1993). “Variational-asymptotical analysis of initially curved and twisted composite beams.” Appl. Mech. Rev., 46, S211–S220.
Cheney, J. A. (1963). “Bending and buckling of thin-walled open-section rings.” J. Engrg. Mech. Div., 89, 17–34.
Cook, R. D. (1991). “Pure bending of curved beams of thin-walled rectangular box section.” J. Appl. Mech., 58, 154–156.
Ecsedi, I., and Dluhi, K. (2005). “A linear model for static and dynamic analysis of non-homogeneous curved beams.” Appl. Math. Model., 29(12), 1211–1231.
Feodosyev, V. (1968). Strength of materials, Mir, Moscow.
Freiberger, W. (1949). “The uniform torsion of an incomplete tore.” Aust. J. Sci. Res., Ser. A, 2, 354–375.
Freiberger, W., and Smith, R. C. T. (1949). “The uniform flexure of an incomplete tore.” Aust. J. Sci. Res., Ser. A, 2, 469–482.
Fubini, G. (1937). “Sulla teoria della trave ad asse curvo.” Atti Accad. Sci. Torino, Cl. Sci. Fis. Mat. Nat., 72-I, 386–410 (in Italian).
Gao, Y., Wang, M. Z., and Zhao, B. S. (2007). “The refined theory of rectangular curved beams.” Acta Mech., 189, 141–150.
Göhner, O. (1938). “Zur Berechnung des gebogenen oder gedrillten Ringstabs mit Kreisquerschnitt und der zylindrischen Schraubenfeder.” Ing.-Arch., 9, 355–371 (in German).
Hodges, D. H. (2003). “Geometrically exact, intrinsic theory for dynamics of curved and twisted anisotropic beams.” AIAA J., 41, 1131–1137.
Kim, M.-Y., Kim, N.-II, and Kim, S.-B. (2006). “Spatial stability of shear deformable nonsymmetric thin-walled curved beams: A centroid-shear center formulation.” J. Eng. Mech., 132(12), 1313–1325.
Kim, M.-Y., Mim, B.-C., and Suh, M.-W. (2000a). “Spatial stability of nonsymmetric thin-walled curved beams. I: Analytical approach.” J. Eng. Mech., 126(5), 497–505.
Kim, M.-Y., Mim, B.-C., and Suh, M.-W. (2000b). “Spatial stability of nonsymmetric thin-walled curved beams. II: Numerical approach.” J. Eng. Mech., 126(5), 506–514.
Langhaar, H. L. (1952), “Torsion of curved beams of rectangular cross section.” J. Appl. Mech., 19, 49–53.
Lembo, M., and Podio-Guidugli, P. (2001). “Internal constraints, reactive stresses, and the Timoshenko beam theory.” J. Elast., 65, 131–148.
Lim, C. W., Wang, C. M., and Kitipornchai, S. (1997) “Timoshenko curved beam bending solutions in terms of Euler-Bernoulli solutions.” Arch. Appl. Mech., 67(3), 179–190.
Love, A. E. H. (1944). A Treatise on the mathematical theory of elasticity, Dover, New York.
Malvern, L. E. (1969). Introduction to the mechanics of a continuous medium, Prentice-Hall, Englewood Cliffs, N.J.
Mentrasti, L. (1996). “Shear-torsion of large curvature beams—Parts I and II.” Int. J. Mech. Sci., 38, 709–733.
Mentrasti, L. (2001). “Bending of large curvature beams—Parts I and II.” Int. J. Solids Struct., 38, 5703–5745.
Mitchell, J. H. (1899). “The uniform torsion and flexure of incomplete tores, with application to helical springs.” Proc. London Math. Soc., 31, 131–146.
Pai, P. F., and Lee, S. Y. (2002) “Three-dimensional postbuckling analysis of curved beams.” Int. J. Comput. Eng. Sci., 3, 305–338.
Pai, P. F., and Nayfeh, A. H. (1994). “A fully nonlinear theory of curved and twisted composite rotor blades accounting for warpings and three-dimensional stress effects.” Int. J. Solids Struct., 31, 1309–1340.
Pai, P. F., and Palazotto, A. N. (1996). “Large-deformation analysis of flexible beams.” Int. J. Solids Struct., 33, 1335–1353.
Pi, Y.-L., and Bradford, M. A. (2001). “Strength design of steel I-section beams curved in plan.” J. Struct. Eng., 127(6), 639–646.
Pi, Y.-L., Bradford, M. A., and Trahair, N. S. (2000). “Inelastic analysis and behavior of steel I-beams curved in plan.” J. Struct. Eng., 126(7), 772–779.
Pi, Y.-L., and Trahair, N. S. (1997). “Nonlinear elastic behavior of I-beams curved in plan.” J. Struct. Eng., 123(9), 1201–1209.
Sadowsky, M. A., and Sternberg, E. (1953). “Pure bending of an incomplete torus.” J. Appl. Mech., 20, 215–226.
Southwell, R. V. (1942). “Some practically important stress-systems in solids of revolution.” Proc. R. Soc. London, Ser. A, 180, 367–396.
Tricomi, F. (1938). “Su di un notevole caso di deformazione di una trave curva.” Atti Accad. Sci. Torino, Cl. Sci. Fis. Mat. Nat., 73-I, 79–109 (in Italian).
Villaggio, P. (1997). Mathematical models for elastic structures, Cambridge University Press, New York.
Yang, Y. B., and Kuo, S. R. (1986). “Static stability of curved thin-walled beams.” J. Eng. Mech., 112(8), 821–841.
Yang, Y. B., and Kuo, S. R. (1987). “Effect of curvature on stability of curved beams.” J. Struct. Eng., 113(6), 1185–1202.
Yoo, C. H., and Pfeiffer, P. A. (1983). “Elastic stability of curved members.” J. Struct. Eng., 109(12), 2922–2940.
Young, W. C., and Budynas, R. G. (2002). Roark’s formulas for stress and strain, 7th Ed., McGraw-Hill, New York.
Yu, W., Hodges, D. H., Volovoi, V. V., and Cesnik, C. E. S. (2002). “On Timoshenko-like modeling of initially curved and twisted composite beams.” Int. J. Solids Struct., 39, 5101–5121.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 135 • Issue 7 • July 2009
Pages: 597 - 613
Copyright
© 2009 ASCE.
History
Received: Jul 2, 2007
Accepted: Dec 9, 2008
Published online: Jun 15, 2009
Published in print: Jul 2009
Notes
Note. Associate Editor: Bojan B. Guzina
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.