Mode II Fracture Localization in Concrete Loaded in Compression
Publication: Journal of Engineering Mechanics
Volume 135, Issue 1
Abstract
As an alternative to a series-coupling model for localization of deformations under uniaxial and confined compression, an approach based on Mode II crack growth is proposed. Such a model appears to be in closer agreement to experimental observations than the presently used series-coupling model, and has the advantage that both material and structural aspects of softening are incorporated directly. Similarities to tensile fracture exist that would make the approach universal.
Get full access to this article
View all available purchase options and get full access to this article.
References
Aifantis, E. C. (1984). “On the microstructural origin of certain inelastic models.” J. Eng. Mater. Technol., 106, 326–330.
Bažant, Z. P. (1989). “Identification of strain-softening constitutive relation from uniaxial tests by series coupling model for localization.” Cem. Concr. Res., 19(6), 973–977.
Broberg, K. B. (2006). “Differences between Mode I and Mode II crack propagation.” Pure Appl. Geophys., 163(9), 1867–1879.
Cundall, P. A. (1971). “A computer model for simulating progressive large-scale movements in blocky rock systems.” Proc., Int. Society for Rock Mechanics Symp., Nancy, France, Paper II-8.
Damgaard Jensen, A., and Chatterji, S. (1996). “State-of-the-art report on microcracking and lifetime of concrete—Part 1.” Mater. Struct., 29(1), 3–8.
De Borst, R., and Muhlhaus, H.-B. (1991). “Continuum models for discontinuous media.” Fracture processes of concrete, rock, and ceramics, J. G. M. van Mier, J. G. Rots, and A. Bakker, eds., Chapman & Hall, London, 601–618.
Evans, R. H., and Marathe, M. S. (1968). “Microcracking and stress–strain curves for concrete in tension.” Mater. Struct., 1(1), 61–64.
Fortt, A. L., and Schulson, E. M. (2007). “The resistance to sliding along Coulombic shear faults in ice.” Acta Mater., 55(7), 2253–2264.
Hallbauer, D. K., Wagner, H., and Cook, N. G. W. (1973). “Some observations concerning the microscopic and mechanical behavior of quartzite specimens in stiff triaxial compression tests.” Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 10, 713–726.
Hillerborg, A. (1990). “Fracture mechanics concepts applied to moment capacity and rotational capacity of reinforced concrete beams.” Eng. Fract. Mech., 35(1/2/3), 233–240.
Hudson, J. A., Crouch, S. L., and Fairhurst, C. (1972). “Soft, stiff and servocontrolled testing machines: A review with reference to rock failure.” Eng. Geol. (Amsterdam), 6(3), 155–189.
Hughes, B. P., and Chapman, G. P. (1966). “The complete stress-strain curve for concrete in direct tension.” RILEM Bull., 30, 95–97.
Jansen, D. C., and Shah, S. P. (1997). “Effect of length on compressive strain softening of concrete.” J. Eng. Mech., 123(1), 25–35.
Kotsovos, M. D. (1983). “Effect of testing techniques on the postultimate behavior of concrete in compression.” Mater. Struct., 16(1), 3–12.
Lilliu, G., and van Mier, J. G. M. (2003). “3D lattice-type fracture model for concrete.” Eng. Fract. Mech., 70(7/8), 927–942.
Lockner, D. A., and Byerlee, J. D. (1992). “Fault growth and acoustic emission in confined granite.” Appl. Mech. Rev., 45(3), 165–173.
Markeset, G. (1993). “Compressive failure of concrete including strain gradients.” Ph.D. thesis, Norwegian Institute of Technology, Trondheim, Norway.
Markeset, G. (1995). “Comments on size dependence and brittleness of HSC.” SINTEF Rep. STF70-A95029, SINTEF, Trondheim, Norway.
Markeset, G., and Hillerborg, A. (1995). “Softening of concrete in compression—localization and size effects.” Cem. Concr. Res., 25(4), 702–708.
Markovic, I., Walraven, J. C., and Van Mier, J. G. M. (2003). “Development of high-performance hybrid fiber concrete.” Proc., 4th High-Performance Fiber-Reinforced Cementitious Composites Conf., A. E. Naaman, and H. W. Reinhardt, eds., RILEM, Bagneux, France, 277–300.
Moore, D. E. (1993). “Microcrack populations associated with a propagating shear fracture in granite.” U.S. Geological Survey Rep. 93-245, 1–88, U.S. Geological Survey, Reston, Va.
Moore, D. E., and Lockner, D. A. (1995). “The role of microcracking in shear–fracture propagation in granite.” J. Struct. Geol., 17(1), 95–114.
Pamin, J. (1994). “Gradient-dependent plasticity in numerical simulation of localization phenomena.” Ph.D. thesis, Delft Univ. of Technology, Delft, The Netherlands.
Prado, E. P., and van Mier, J. G. M. (2003). “Effect of particle structure on Mode I fracture process in concrete.” Eng. Fract. Mech., 70(14), 1793–1807.
Rokugo, K., Ohno, S., and Koyanagi, W. (1985). “Automatical measuring system of load–displacement curves including postfailure region of concrete specimens.” Fracture toughness and fracture energy of concrete, F. H. Wittmann, ed., Elsevier, Amsterdam, The Netherlands, 403–411.
Rossi, P., and Renzew, S. (1996). “High-performance multimodal fiber-reinforced cement composites (HPMFRCC).” Proc., 4th Int. Symp. on High-Strength Concrete, Paris, 687–694.
Schlangen, E., and Van Mier, J. G. M. (1992). “Experimental and numerical analysis of the micromechanisms of fracture of cement-based composites.” Cem. Concr. Compos., 14(2), 105–118.
Shah, S. P., Gokoz, U., and Ansari, F. (1981). “Experimental technique for obtaining complete stress–strain curves for high-strength concrete.” Cem., Concr., Aggregates, 3(1), 21–27.
Stähli, P., and Van Mier, J. G. M. (2004). “Three-fiber-type hybrid fiber concrete.” Proc., FraMCoS-V, Vail, Colo., V. C. Li, C. K. Y. Leung, K. J. Willam, and S. L. Billington, eds., IA-FraMCoS, Evanston, Ill., 1105–1112.
Timoshenko, S. P., and Goodier, J. N. (1970). Theory of elastcity, 3rd Ed., McGraw-Hill, Tokyo.
Van Geel, E. (1998). “Behavior of concrete in multiaxial compression.” Ph.D. thesis, Eindhoven Univ. of Technology, Eindhoven, The Netherlands.
Van Mier, J. G. M. (1984). “Strain softening of concrete under multiaxial loading conditions.” Ph.D. thesis, Eindhoven Univ. of Technology, Eindhoven, The Netherlands.
Van Mier, J. G. M. (1986a). “Multiaxial strain-softening of concrete.” Mater. Struct., 19(3), 179–200.
Van Mier, J. G. M. (1986b). “Fracture of concrete under complex stress.” Heron, 31(3), 1–90.
Van Mier, J. G. M. (1991). “Mode I fracture of concrete: Discontinuous crack growth and crack interface grain bridging.” Cem. Concr. Res., 21(1), 1–15.
Van Mier, J. G. M. (1998). “Failure of concrete under uniaxial compression: An overview.” Proc., FraMCoS-3, H. Mihashi, and K. Rokugo, eds., Aedificatio, Freiburg, Germany, 1169–1182.
Van Mier, J. G. M. (2004). “Reality behind fictitious cracks?” Proc., FraMCoS-V, V. C. Li, C. K. Y. Leung, K. J. Willam, and S. L. Billington, eds., IA-FraMCoS, Evanston, Ill., 11–31.
Van Mier, J. G. M. et al. (1997). “Strain softening of concrete in uniaxial compression.” Mater. Struct., 30(4), 195–209.
Van Mier, J. G. M., and Nooru-Mohamed, M. B. (1990). “Geometrical and structural aspects of concrete fracture.” Eng. Fract. Mech., 35(4/5), 617–628.
Van Mier, J. G. M., and Vonk, R. A. (1991). “Fracture of concrete under multiaxial stress—recent developments.” Mater. Struct., 24(1), 61–65.
Van Vliet, M. R. A., and Van Mier, J. G. M. (1996). “Experimental investigation of concrete fracture under uniaxial compression.” Mech. Cohesive-Frict. Mater., 1(1), 115–127.
Vonk, R. A. (1992). “Softening of concrete loaded in compression.” Ph.D. thesis, Eindhoven Univ. of Technology, Eindhoven, The Netherlands.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Apr 26, 2007
Accepted: Mar 6, 2008
Published online: Jan 1, 2009
Published in print: Jan 2009
Notes
Note. Associate Editor: Christian Hellmich
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.