Quantification of Doublet Vector Distribution of Granular Materials
Publication: Journal of Engineering Mechanics
Volume 127, Issue 7
Abstract
Soil fabric quantities such as doublet vector and branch vector distributions are important in doublet mechanics and micromechanics modeling of soil behavior. The quantification of these quantities is therefore imperative in applying and verifying these modeling techniques. This paper presents the development of a new method to quantify the doublet distribution of granular assemblies and some experimental results. The method treated doublet vectors as random vectors and built up the integrated distribution function from the distribution functions of the projections of the random vectors in the three orthogonal subspaces. A mechanism to evaluate the doublet vector distribution from sectional images was developed for the case of granular assemblies composed of spherical or subspherical particles. A procedure was also developed to assess the integrated distribution function through evaluating the projection distribution functions in two orthogonal subspaces for the case of axial-symmetric distribution of doublet vectors of spherical particles. The comparison of the doublet distribution of a dense Ottawa sand specimen, quantified by the proposed procedure, with Oda's experimental observations on contact normal distributions indicated a qualitative consistency. Doublet distribution of spherical assemblies is the same as the branch vector distribution and the contact normal distribution when the nearest neighbors are in contact, and therefore can be applied in both doublet mechanics and micromechanics modeling. The developed procedure is not scale-dependent and can be used to quantify these distributions of particulate materials in different length scales.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arthur, J. R. F., Dunstan, T., Al-Ani, Q. A. J., and Assadi, A. ( 1977). “Plastic deformation and failure in granular media.” Géotechnique, London, 27(1), 53–74.
2.
Bagi, K. ( 1996). “Stress and strain in granular assemblies.” Mech. of Mat., Amsterdam, North-Holland, 22, 165–177.
3.
Bardet, J. P. ( 1994). “Observations on the effects of particle rotations on the failure of idealized granular materials.” Mech. of Mat., Amsterdam, North-Holland, 18, 159–182.
4.
Borja, R. I., and Wren, J. R. ( 1995). “Micromechanics of granular media. Part I: Generation of overall constitutive equation for assemblies of circular disks.” Comput. Methods Appl. Mech. Engrg., 127, 13–36.
5.
Chang, C. S., and Gao, J. ( 1996). “Kinematic and static hypotheses for constitutive modeling of granulates considering particle rotation.” Acta Mechanica, 115, 213–229.
6.
Chang, C. S., and Ma, L. ( 1991). “A micromechanical-based micropolar theory for deformation of granular solids.” Int. J. Solids and Struct., 28(1), 67–86.
7.
Chang, S. C., and Gao, J. ( 1995). “Second gradient constitutive theory for granular material with random structure.” Int. J. Solids and Struct., 32(16), 2279–2293.
8.
Christoffersen, J., Mehrabadi, M. M., and Nemat-Nasser, S. ( 1981). “A micromechanical description of granular material behavior.” J. Appl. Mech., 48, 339–344.
9.
Cowin, S. C. ( 1985). “The relationship between the elasticity tensor and the fabric tensor.” Mech. of Mat., Amsterdam, North-Holland, 4, 137–147.
10.
Cowin, S. C. ( 1986). “Fabric dependence of an anisotropic strength criterion.” Mech. of Mat., Amsterdam, North-Holland, 5, 251–260.
11.
Cowin, S. C. ( 1992). “A note on the microstructural dependence of the anisotropic elastic constants of textured materials.” Advances in micromechanics of granular materials, H. H. Shen et al., eds., Elsevier Science, New York, 61–70.
12.
Ferrari, M., Vladimir, T., Granik, A. L., and Nadeau, J. C., eds. ( 1997). Advances in doublet mechanics, Springer, Berlin.
13.
Granik, V. T., and Ferrari, M. ( 1993). “Microstructural mechanics of granular media.” Mech. of Mat., Amsterdam, North-Holland, 15, 301–322.
14.
Hill, R. ( 1963). “Elastic properties of reinforced solids: Some theoretical principles.” J. Mech. Phys. Solids, 11, 357–372.
15.
Kanatani, K.-I. ( 1979). “A micropolar continuum theory for the flow of granular materials.” Int. J. Engrg. Sci., 17, 419–432.
16.
Kanatani, K.-I. ( 1984a). “Stereological determination of structural anisotropy.” Int. J. Engrg. Sci., 22(5), 531–546.
17.
Kanatani, K.-I. ( 1984b). “Stereological determination of structural anisotropy.” Int. J. Engrg. Sci., 22(5), 531–546.
18.
Kanatani, K.-I. ( 1985). “Distribution of directional data and fabric tensors.” Int. J. Engrg. Sci., 22(2), 149–164.
19.
Kuo, C.-Y. ( 1994). “Quantifying the fabric of granular materials—An image analysis approach.” PhD thesis, School of Civ. and Envir. Engrg., Georgia Institute of Technology, Atlanta.
20.
Kuo, C.-Y., Frost, J. D., Lai, J. S., and Wang, L. B. ( 1996). “Three-dimensional image analysis of aggregate particle from orthogonal projections.” Transp. Res. Rec. 1526, Transportation Research Board, Washington, D.C., 98–103.
21.
Maddalena, F., and Ferrai, M. ( 1995). “Viscoelasticity of granular materials.” Mech. of Mat., Amsterdam, North-Holland, 20, 241–250.
22.
Mauhlhaus, H.-B., and Vardoulakis, I. ( 1987). “The thickness of shear bands in granular materials.” Gëotechnique, London, 37(3), 271–283.
23.
Mehrabadi, M. M., and Nemat-Nasser, S. ( 1983). “Stress, dilatancy and fabric in granular materials.” Mech. of Mat., Amsterdam, North-Holland, 2, 155–161.
24.
Mehrabadi, M. M., Nemat-Nasser, S., and Oda, M. ( 1982). “On statistical description of stress and fabric in granular materials.” Int. J. Numer. and Analytical Methods in Geomech., 6, 95.
25.
Mura, T. ( 1982). Micromechanics of defects in solids, Martinus Nijhoff Publishers, The Hague, The Netherlands, 164–168.
26.
Nemat-Nasser, S., and Mehrabadi, M. ( 1984). “Micromechanically based rate constitutive descriptions for granular materials.” Mechanics of engineering materials, C. S. Desai and R. H. Gallagher, eds., Wiley, New York, 451–463.
27.
Oda, M. ( 1972a). “Initial fabrics and their relations to mechanical properties of granular material.” Soils and Found., Tokyo, 12(1), 17–36.
28.
Oda, M. ( 1972b). “The mechanism of fabrics changes during compressional deformation of sand.” Soils and Found., Tokyo, 12(2), 1–18.
29.
Oda, M. ( 1972c). “Deformation mechanism of sand in triaxial compression tests.” Soils and Found., Tokyo, 12(4), 45–63.
30.
Oda, M., Konishi, J., and Nemat-Nasser, S. ( 1982). “Experimental micromechanical evaluation of strength of granular materials: Effects of particle rolling.” Mech. of Mat., Amsterdam, North-Holland, 1, 269–283.
31.
Pugachev, V. S. ( 1984). Probability theory and mathematical statistics for engineers, Pergamon, Tarrytown, N.Y.
32.
Rothenburg, L., and Bathurst, R. J. ( 1982). “A micromechanical definition of the Cauchy stress tensor for particulate media.” 469–487.
33.
Rothenburg, L., and Bathurst, R. J. ( 1992). “Micromechanical features of granular assemblies with planar elliptical particles.” Géotechnique, London, 42(1), 79–95.
34.
Rowe, P. W. ( 1962). “The stress-dilatancy relation for static equilibrium of an assembly of particles in contact.” Proc., Royal Soc., London, A269, 500–527.
35.
Satake, M. ( 1978). “Constitution of mechanics of granular materials through the graph theory.” S. C. Cowin and M. Satake, eds., Proc., U.S.-Japan Seminar on Continuum Mech. and Statistical Approaches in the Mech. of Granular Mat., Gakujutsu Bunken Fukyu-Kai, Tokyo.
36.
Satake, M. ( 1992). “New formulation of graph-theoretical approach in the mechanics of granular materials.” Advances in micromechanics of granular materials, H. H. Shen et al., ed., 1–10.
37.
Tobita, Y. ( 1989). “Fabrict tensors in constitutive equations for granular materials.” Soils and Found., Tokyo, 28(2), 113–126.
38.
Toda, M. ( 1988). Theory of nonlinear lattices, volume 20 of Springer series in solid state sciences, 2nd Ed., Springer, Berlin.
39.
Tozeren, A., and Skalak, R. ( 1989). “Does fabric tensor exist for fabric?” J. Mat. Sci., 24, 1700–1706.
40.
Vardoulakis, I. ( 1980). “Shear band inclination and shear modulus of sand in biaxial tests.” Int. J. Numer. and Analytical Methods in Geomech., 4, 103–119.
Information & Authors
Information
Published In
History
Received: Feb 26, 2001
Published online: Jul 1, 2001
Published in print: Jul 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.