Mode I Fracture Behavior in Concrete: Nonlocal Damage Modeling
Publication: Journal of Engineering Mechanics
Volume 127, Issue 7
Abstract
A nonlocal damage model is used to reproduce typical uniaxial tension tests with reference to a normal strength concrete. A strip and a notched plate subjected to uniaxial tension are first investigated in order to have an insight into the correlations between the specimen geometries and the main constitutive parameters governing the fracture process. It should be noted that the internal length is related to the characteristic length. The former defines the finite volume characterizing the constitutive behavior of the material and the latter identifies the size of an imaginary and uniformly damaged crack band; this relation depends on the geometry used for the calibration, e.g., the strip or the notched plate. The numerical results are shown to be independent on the finite-element type and mesh refinement and to be affected by the law that relates the accumulation of the irreversible strains with the damage growth and by the input constitutive law. A direct tension test on a notched cylinder and a three-point bending test on a notched beam were numerically simulated in order to check the reliability of the model. Both analyses were carried out taking advantage of the tensile strength ft and fracture energy Gf measured by testing the notched cylinder. The cross-examination of the experimental and theoretical results gives the opportunity to reexamine some previous tests concerning mode I fracture. These tests showed the great influence that both the boundary conditions and concrete tensile behavior have on crack propagation. This issue is also investigated by numerically performing a wedge-splitting test, in order to study the evolution of the fracture energy with the opening displacement at the crack tip, and to compare these results with those of the notched cylinder and bent beam.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bazant, Z. P. ( 1984). “Mechanics of distributed cracking.” Appl. Mech. Rev., 5, 675–705.
2.
Bazant, Z. P. (1991). “Why continuum damage is nonlocal: Micromechanics arguments.”J. Engrg. Mech., ASCE, 117(5), 1070–1087.
3.
Bazant, Z. P. (1994). “Nonlocal damage theory based on micromechanics of crack interactions.”J. Engrg. Mech., ASCE, 120(3), 593–617.
4.
Bazant, Z. P., and Oh, B. H. ( 1983). “Crack band theory for fracture of concrete.” Mat. and Struct., 93, 155–177.
5.
Bazant, Z. P., and Pijaudier-Cabot, G. ( 1988). “Nonlocal continuum damage, localization instability and convergence.” J. Appl. Mech., 55, 287–293.
6.
Bazant, Z. P., and Pijaudier-Cabot, G. (1989). “Measurement of characteristic length of nonlocal continuum.”J. Engrg. Mech., ASCE, 115(4), 755–767.
7.
Brühwiler, E., and Wittmann, F. H. ( 1990). “The wedge splitting test, a new method of performing stable fracture mechanic tests.” Engrg. Fracture Mech., 35(1/2/3), 117–125.
8.
Calone, E., and di Prisco, M. ( 1997). “On the tensile behaviour of high strength concrete: A non-local damage approach.” Studi e Ricerche, Politecnico di Milano, Milano, Italy, 18, 107–137.
9.
Ceriani, F., and Desiderio, A. ( 1997). “A theoretical and experimental approach to investigate concrete tensile behaviour.” MSc thesis, Politecnico di Milano, Milano, Italy (in Italian).
10.
Comité Euro-International du Béton-Fédération International de la Précontrainte (CEB-FIP). ( 1991). Model code 1990, Paris.
11.
Cornelissen, H. A. W., Hordijk, D. A., and Reinhardt, H. W. ( 1986). “Experimental determination of crack softening characteristic of normal weight and lightweight concrete.” Heron, 31(2), 45–56.
12.
di Prisco, M., and Felicetti, R. ( 1998). “On fatigue of plain and fiber reinforced-concrete ground-slabs.” Tech. Rep. n.1a/98, Politecnico di Milano, Milano, Italy.
13.
di Prisco, M., and Felicetti, R. ( 1999). “HSC thin webroof elements: An experimental investigation on steel fibre benefits.” Proc., 5th Int. Symp. on Utilization of HS/HPS Sandefjord, 546–555.
14.
di Prisco, M., Felicetti, R., and Gambarova, P. G. ( 1999). “On the evaluation of the characteristic length in high strength concrete.” High strength concrete, A. Azizinamini, D. Darwin, and C. French, eds., ASCE, Reston, Va., 377–390.
15.
di Prisco, M., and Ferrara, L. ( 1996). “A trial method to follow the progressive localization of fracture process in concrete.” Studi e Ricerche, Politecnico di Milano, Milano, Italy, 17, 1–35.
16.
di Prisco, M., Ferrara, L., Meftah, F., Pamin, J., de Borst, R., Mazars, J., and Reynouard, J. M. ( 2000). “Mixed mode fracture in plain and reinforced concrete: Some results on benchmark tests.” Int. J. Fracture, 103, 127–148.
17.
di Prisco, M., and Mazars, J. ( 1992). “On damage modelling of reinforced concrete subject to high strain gradients.” Studi e Ricerche, Politecnico di Milano, Milano, Italy, 13, 33–81.
18.
di Prisco, M., and Mazars, J. ( 1996). “Crush-crack: A non-local damage model for concrete.” J. Mech. Cohesive and Frictional Mat., 1, 321–347.
19.
Ferrara, L. ( 1998). “A contribution to the modelling of mixed-mode fracture and shear transfer in plain and reinforced concrete.” PhD thesis, Dept. of Struct. Engrg., Politecnico di Milano, Milano, Italy.
20.
Ferrara, L., di Prisco, M., and Plizzari, G. ( 1999). “The wedge-splitting test: Crack propagation modelling and boundary-condition role.” Studi e Ricerche, Politecnico di Milano, Milano, Italy, 20, 97–125.
21.
Fokwa, D., and Berthaud, Y. ( 1993). “Heterogeneous materials: Experimental analysis of localization and the influence of size of the heterogeneities on the behavior in tension.” Mat. and Struct., 26, 136–143.
22.
Hillerborg, A. ( 1985a). “The theoretical basis of a method to determine the fracture energy GF of concrete.” Mat. and Struct., 106, 291–296.
23.
Hillerborg, A. ( 1985b). “Results of three comparative test series for determining the fracture energy GF of concrete.” Mat. and Struct., 107, 407–413.
24.
Hordijk, D. ( 1991). “Local approach to fatigue of concrete.” PhD thesis, Delft University of Technology, Delft, The Netherlands.
25.
Hordijk, D. A., Reinhardt, H. W., and Cornelissen, H. A. W. ( 1987). “Fracture mechanics parameters of concrete from uniaxial tests as influenced by specimen length.” Proc., SEM-RILEM Int. Conf. on Fracture of Concrete and Rock, S. P. Shah and S. S. Swartz, eds., 138–149.
26.
Linsbauer, H. N., and Tschegg, E. K. ( 1986). “Fracture energy determination of concrete with cube-shaped specimens.” Zement und Beton, 31, 38–40.
27.
Maffei, S. ( 1999). “Analysis and design of FRC slabs: From material to structure.” MSc thesis, Politecnico di Milano, Milano, Italy (in Italian).
28.
Mechtcherine, V., and Müller, H. S. ( 1998). “Effect of the test set-up on fracture mechanical parameters of concrete.” Proc., FRAMCOS-3, Fracture Mech. of Concrete Struct., AEDIFICATIO Publishers, Freiburg, Germany, 377–386.
29.
Mihashi, H., Kirikoshi, K., Nomura, N., Otsuka, K., and Kaneko, Y. ( 1998). “Microcracking behavior and softening properties of concrete.” Proc., FRAMCOS-3, Fracture Mech. of Concrete Struct., AEDIFICATIO Publishers, Freiburg, Germany, 181–191.
30.
Pijaudier-Cabot, G., and Bazant, Z. P. (1987). “Nonlocal damage theory.”J. Engrg. Mech., ASCE, 113(10), 1512–1533.
31.
Rots, J. G., and de Borst, R. ( 1989). “Analysis of concrete fracture in direct tension.” Int. J. Solids and Struct., 25(12), 1381–1394.
32.
Saenz, L. P. ( 1964). “Discussion of `Equation for the stress-strain curve of concrete,' by Prakash Desay and S. Krishnan.” ACI J., 1229–1230.
33.
El-Sayed, K. M., Guinea, G. V., Rocco, C., Planas, J., and Elices, M. ( 1998). “Influence of aggregate shape on the fracture behaviour of concrete.” Proc., FRAMCOS-3, Fracture Mech. of Concrete Struct., AEDIFICATIO Publishers, Freiburg, Germany, 171–179.
34.
Trunk, B., and Wittmann, F. H. ( 1998). “Experimental investigation into the size dependence of fracture mechanics parameters.” Proc., FRAMCOS-3, Fracture Mech. of Concrete Struct., AEDIFICATIO Publishers, Freiburg, Germany, 1937–1948.
35.
Uchida, Y., and Barr, B. I. G. ( 1998). “Tension softening curves of concrete determined from different test specimen geometries.” Proc., FRAMCOS-3, Fracture Mech. of Concrete Struct., AEDIFICATIO Publishers, Freiburg, Germany, 387–398.
36.
van Mier, J. G. M., Schlangen, E., and Vervuurt, A. ( 1996). “Tensile cracking in concrete and sandstone: Part 2—Effect of boundary rotations.” Mat. and Struct., 29, 87–96.
37.
van Vliet, M. R. A. ( 2000). “Size effect in tensile fracture of concrete and rock.” PhD thesis, Delft University of Technology, Delft, The Netherlands.
38.
Wittmann, F. H., Slowik, A., and Alvaredo, A. M. ( 1994). “Probabilistic aspects of fracture energy of concrete.” Materials and Struct., 27, 499–504.
39.
Zhou, F. P. ( 1995). “Influences of notch size, eccentricity and rotational stiffness on fracture properties determined in tensile test.” Proc., Int. Conf. on Fracture Mech., FRAMCOS 2, F. H. Wittman, ed., AEDIFICATIO, Freiburg, Germany, 65–74.
Information & Authors
Information
Published In
Journal of Engineering Mechanics
Volume 127 • Issue 7 • July 2001
Pages: 678 - 692
History
Received: Jul 13, 2000
Published online: Jul 1, 2001
Published in print: Jul 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.