Kinematics of Crack Formation in Cementitious Composites by Fiber Optics
Publication: Journal of Engineering Mechanics
Volume 119, Issue 5
Abstract
Assessment of fracture characteristics for cementitious composites subjected to impact loading is important in prediction of structural response and residual capacity under dynamic loading conditions. In the study reported herein, three‐point‐bend fiber‐reinforced‐concrete (FRC) specimens were tested under an impact velocity of 1.1 m/s (43 in./s). The range of specimens tested in this study included plain concrete as well as FRC reinforced with 0.5%, 1.0%, and 1.5% by volume of straight steel fibers. A new fiber‐optic sensor is introduced, by which it is possible to directly measure the displacements associated with opening of cracks in cementitious composites, if their locations are known a priori. Hence, such sensors are most suited for experimental determination of crack tip opening displacements (CTOD) in notched specimens. The development and calibration of this fiber‐optic sensor for use in cementitious composites is described. Crack tip opening displacements are measured at the tip of notched FRC specimens by embedment of fiber‐optic sensors in the specimens during mixing. The fiber‐optic sensor developed in the present study can be employed in experiments involving both static and dynamic loads.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ansari, F. (1987). “Stress‐strain response of microcracked concrete in direct tension.” ACI Mater. J., 84(6), 481–490.
2.
Ansari, F. (1989). “Mechanism of microcrack formation in concrete.” ACI Mater. J., 86(5), 459–464.
3.
Butter, C. D., and Hocker, G. B. (1978). “Fiber optic strain sensor.” Appl. Optics, 17(18), 2867–2873.
4.
Claus, R. O., Bennett, K. D., and May, R. G. (1988). “Optical fiber methods for the NDE of smart skins and structures.” Proc. Fall Conf. Society for Experimental Mech., Bethel, Conn., 19–24.
5.
Gillespie, R. C., Go, C. G., and Swartz, S. E. (1984). “Vertical displacement gage fixture for testing.” Exp. Techniques, 8(5), 18–21.
6.
Gloge, D. (1972). “Bending loss in multimode fibers with graded and ungraded index.” Appl. Optics, 11(14), 2506–2513.
7.
John, R., and Shah, S. P. (1986). “Fracture of concrete subjected to impact loading.” Cem. Concr. Aggregates, 8(1), 24–32.
8.
Li, V. C., and Leung, K. Y. (1987). “Experimental determination of the tension softening relations for cementitious composites.” Cem. Conor. Res., 17(4), 441–452.
9.
Marcuse, D. (1976). “Field deformation and loss caused by curvature of optical fibers.” J. Opt. Society of America, 66(7), 311–320.
10.
Measures, R. M., Glossop, N. D., Lymer, J., LeBlanc, M., West, J., Dubois, S., Tsaw, W., and Tennyson, R. C. (1989). “Structurally integrated fiber optic damage assessment system for composite materials.” Appl. Optics, 28(12), 2626–2633.
11.
Rice, J. R. (1968). “Mathematical analysis in the mechanics of fracture.” Fracture: An advanced treatise, H. Liebowitz, ed., Academic Press, New York, N.Y. 191–311.
12.
Shah, S. P. (1986). “Concrete and fiber reinforced concrete subjected to impact loading.” Cement Based Composites: Strain Rate Effects, MRS Symp. Proc., Mater. Res. Society, Pittsburgh, Pa., 64, 181–201.
13.
Swartz, S. E., and Go, C. G. (1984). “Evaluation of the validity of compliance calibration to estimate crack lengths in concrete beams in bending.” Exp. Mech., 24(2), 72–78.
14.
Yao, S. K., and Asawa, C. K. (1983). “Fiber optical intensity sensors.” 1(3), 562–574.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Nov 19, 1991
Published online: May 1, 1993
Published in print: May 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.