Turbulent Velocity in Flocculation by Means of Grids
Publication: Journal of Environmental Engineering
Volume 125, Issue 3
Abstract
Eleven types of single circular biplane grids with different diameter (d) and mesh (M) were vertically and constantly oscillated inside a 2 L square jar. The velocity components were measured using a 2D laser doppler anemometer. The average root-mean-square turbulent velocity q′ values were found to be relatively constant at both vertical and horizontal points of measurement—a condition that could not be achieved in the case of impeller mixing. Since the mixing intensity was uniform within the jar, the average volume velocity gradient could be applied as the surrogate mixing intensity parameter. It was also found that q′ was linearly related to the vertical grid speed and grid physical characteristics, indicating that the mixing was easily controlled. The macro length scale (L) was calculated and was found to be constant and proportional to d or M, as it should be in the case of turbulent mixing. This study shows the potential of grids as the mixing devices that can be expected to produce an optimum mixing environment for the flocculation process.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Amirtharajah, A. ( 1978). “Design of rapid mixing units.” Water treatment plant design, R. L. Sanks, ed., Ann Arbor Science, Ann Arbor, Mich., 131–148.
2.
Amirtharajah, A., and Tambo, N. ( 1991). “Mixing in water treatment.” Mixing in coagulation and flocculation, A. Amirtharajah, M. M. Clark, and R. R. Trussell, eds., American Water Works Association, Denver, 3–34.
3.
Annand, W. J. D. ( 1953). “The resistance to air flow of wire gauzes.” J. Royal Aeronautical Soc., London, 57, 141–146.
4.
Baines, W. D., and Peterson, E. G. ( 1951). “An investigation of flow through screens.” Trans. ASME, 73, 467–480.
5.
Batchelor, G. K., and Townsend, A. A. ( 1948). “Decay of isotropic turbulence in the initial period.” Proc. Royal Soc., A., London, 193, 539– 557.
6.
Brumley, B. H., and Jirka, G. H. ( 1987). “Near-surface turbulence in a grid-stirred tank.” J. Fluid Mech., Cambridge, U.K., 183, 235–263.
7.
Camp, T. R. ( 1955). “Flocculation and flocculation basin.” Trans. ASCE, 1–16.
8.
Camp, T. R., and Stein, P. C. ( 1943). “Velocity gradients and internal work in fluid motion.” J. Boston Soc. of Civ. Engrs., 30(10), 219–237.
9.
Cheng, C.-Y., Atkinson, J. F., and Bursik, M. I. (1997). “Direct measurement of turbulence structures in mixing jar using PIV.”J. Envir. Engrg., 123(2), 115–125.
10.
Comte-Bellot, G., and Corrsin, S. ( 1966). “The use of a contraction to improve the isotropy of grid-generated turbulence.” J. Fluid Mech., Cambridge, U.K., 25, 657–682.
11.
Dickey, T. D., and Mellor, G. L. ( 1980). “Decaying turbulence in stratified and normal fluids.” J. Fluid Mech., Cambridge, U.K., 99, 13–31.
12.
Hudson, H. E. Jr., and Wagner, E. G. ( 1981). “Conduct and use of jar tests.” J. AWWA, 73(4), 218–224.
13.
Kostazos, A. E., Apikides, P. S., Kastrinakis, E. G., and Nychas, S. G. ( 1994). “Oscillating grid turbulence and bulk mixing at high schmidt numbers.” Can. J. Chem. Engrg., Ottawa, 72, 431–439.
14.
Kresta, S. M., and Wood, P. E. ( 1993). “The flow field produced by a pitched blade turbine: Characterization of the turbulence and estimation of the dissipation rate.” Chem. Engrg. Sci., 48(10), 1761–1774.
15.
Laws, E. M., and Livesey, J. L. ( 1978). “Flow through screens.” Annu. Rev. of Fluid Mech., 10, 247–266.
16.
Long, R. R. ( 1978). “Theory of turbulence in a homogeneous fluid induced by an oscillating grid.” Phys. of Fluids, 21(10), 1887–1888.
17.
Mujumdar, A. S., Huang, B., Wolf, D., Weber, M. E., and Douglas, W. J. M. ( 1970). “Turbulence parameters in a stirred tank.” Can. J. Chem. Engrg., Ottawa, 48, 475–483.
18.
Parker, D. S., Kaufman, W. J., and Jenkins, D. (1972). “Floc breakup in turbulent flocculation processes.”J. Sanitary Engrg. Div., ASCE, 98(1), 79–99.
19.
Pinker, R. A., and Herbert, M. V. ( 1967). “Pressure loss associated with compressible flow through square-mesh wire gauzes.” J. Mech. Engrg. and Sci., 9(1), 11–23.
20.
Roach, P. E. ( 1987). “The generation of nearly isotropic turbulence by means of grids.” J. Heat and Flow, 8(2), 82–92.
21.
Stanley, S. J. ( 1995). “Measurement and analysis of mixing as it relates to flocculation,” PhD thesis, University of Alberta, Edmonton, Ala., Canada.
22.
Stanley, S. J., and Smith, D. W. (1995). “Measurement of turbulent flow in standard jar test apparatus.”J. Envir. Engrg., ASCE, 121(12), 902– 910.
23.
Taylor, G. I. ( 1935a). “Statistical theory of turbulence. Part I.” Proc. Royal Soc., A., London, 151, 421–443.
24.
Taylor, G. I. ( 1935b). “Statistical theory of turbulence. Part II.” Proc. Royal Soc., A., London, 151, 444–454.
25.
Tennekes, H., and Lumley, J. L. ( 1972). A first course in turbulence . MIT Press, Cambridge, Mass.
26.
Thompson, S. M., and Turner, J. S. ( 1975). “Mixing across an interface due to turbulence generated by an oscillated grid.” J. Fluid Mech., Cambridge, U.K., 67, 349–368.
27.
Van't Riet, K., Bruijn, W., and Smith, J. M. ( 1976). “Real and pseudo-turbulence in the discharge stream from a rushton turbine.” Chem. Engrg. Sci., 31, 407–412.
28.
Wu, H., and Patterson, G. K. ( 1989). “Laser-doppler measurements of turbulent-flow parameters in stirred mixer.” Chem. Engrg. Sci., 44(10), 2207–2221.
29.
Wu, H., Patterson, G. K., and Van Doorn, M. ( 1989). “Distribution of turbulence energy dissipation rate in a rushton turbine stirred mixer.” Experiments in Fluids, 8, 153–160.
Information & Authors
Information
Published In
History
Received: Mar 18, 1998
Published online: Mar 1, 1999
Published in print: Mar 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.